HP Color 9850mfp HP Color 9850mfp - System Administrator Guide - Page 117

Recalling previous job settings Follow the procedure below for copying using the settings of a previous job. Note Only the last-completed output job settings can be recalled as the previous job settings. Non-complete job or reserve job settings cannot be recalled, even if the setting operations have been made last. The previous job settings can be recalled, even after the engine power is cycled. 1 Press Job Memory on the control panel. The Job No. Selection screen is displayed. 2 Touch PRE-JOB RECALL. The JOB CHECK key is displayed between STORE and PRE-JOB RECALL on the screen. 3 Touch JOB CHECK to display the Job Check screen. Check the settings of the previous output job. 4 Touch OK to return to the Main screen. The settings of the previous output job are recalled on the screen. 5 Change the settings recalled on the screen, if desired. 6 When all settings are acceptable, position original(s) in the document feeder or on the scanner glass, and then press Start. ENWW 105