HP Color 9850mfp HP Color 9850mfp - System Administrator Guide - Page 345
Procedure, Auto reset timer, Reset key function, RADF ADF-Original effect, Job memory auto recall 30
View all HP Color 9850mfp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 345 highlights
SW No. Item Setting No. 48: Screen (MonoColor - Photo) HighCompression, LineScreen-HighResolution, LineScreen-SmoothTone, DotScreen-High Resolution, DotScreen-SmoothTone No. 49: Color gamut Normal, Wide 1 2 ENWW 1 Key operator mode screen 2 Memory switch setting screen Procedure 1 Touch (13) Memory switch setting to display the Memory switch setting screen. 2 To select the desired item, touch the arrow keys ( ) and ( ) at the right of the Memory switch setting screen to highlight it. To scroll, touch the arrow keys at the lower left corner of the screen. 3 To change the setting of the highlighted item, touch Change setting contents repeatedly until the desired setting is displayed. Repeat above steps 2 to 3 to make several changes in succession. 4 Touch PREVIOUS SCREEN on the Memory switch setting screen to restore the Key operator mode screen. The following functions can be provided by the memory switch settings. (1) Auto reset timer Set the reset interval starting from the completion of a copying job until the engine returns to the initial condition. (2) Reset key function Set the condition of the following modes when Reset is pressed: Copy mode, Copy density, Magnification, Tray selection. (3) RADF (ADF)-Original effect Set the engine condition when original is set on RADF (ADF) in non-RADF (ADF) mode with RADF (ADF) unit closed. (4) Job memory auto recall (30) Job memory number 30 is automatically recalled when power is turned on or when Auto-reset is restored. This job recall function works only when Job number 30 is registered. (5) Finisher mode by Full-auto Set the Output mode to be recalled when Reset is pressed. An outline of the key operator mode 333