HP Color 9850mfp HP Color 9850mfp - System Administrator Guide - Page 247
For 2 Repeat, 4 Repeat or 8 Repeat mode original, RADF ADF is also available., Position original.
View all HP Color 9850mfp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 247 highlights
Note CAUTION Note 6 Select the desired magnification and copy size. APS and AMS are automatically released, and 1.000 (100 percent) is selected as a magnification ratio. When 2 Repeat, 4 Repeat, or 8 Repeat is selected, the scanning area will be a portion of the selected paper size equally divided according to the selected mode. In this case, magnification ratio will be fixed to 1.000 (100 percent). Copy mode is automatically set to 1 1. If 1 2 is selected, Scanner store mode will function automatically. 7 Type the desired print quantity using the control panel keypad. See Setting print quantity for more information. 8 Position original. For Auto mode original, open the document feeder, and then position the original face down on the scanner glass. For 2 Repeat, 4 Repeat or 8 Repeat mode original, RADF (ADF) is also available. See Auto detection/repeat mode specifications for more information. When Auto mode is selected, Non-Image Area Erase functions automatically. Do not close the document feeder. 9 Press Start. When the Finisher/Trimmer Unit/100-sheet output tray capacity is exceeded due to the print quantity selected, remove the copied sets as they exit to avoid misfed paper. The Auto mode may not operate properly if the lighting in the work place is directly over the scanner glass. In this case, consult your service representative about an appropriate place for installation. ENWW 235