HP Color 9850mfp HP Color 9850mfp - System Administrator Guide - Page 368

Features of the HP Color 9850mfp AES - automatic exposure selection Automatically adjusts exposure to compensate for quality of the original. ATS - automatic tray switching Automatically switches tray to allow copying to continue without interruption if the selected tray empties while copying is in progress. Auto layout The original image on the scanner glass or in the document feeder is copied and centered on a sheet. Auto low power Automatically lowers the power after a specified period of inactivity of the MFP. AMS (Automatic Magnification Selection) Automatically selects an appropriate magnification ratio when copy size is selected manually. Automatically selected when the AMS key is touched. APS (Automatic Paper Selection) Automatically selects copy paper size to match the original documents. Auto shut-off Automatically shuts off the main power after a specified period of inactivity. Book copy Copies both pages of an open book or book-size sheet separately onto two letter sheets in 1 1 mode or separately onto each side of one letter sheet in 1 2 mode. You can use the Book copy mode with the Front or Front/back cover mode. The cover page(s) are scanned and copied normally before image division is performed on the other pages. Booklet Creates a multiple-page signature booklet copied on both sides of paper in 1 2 or 2 2 copy mode. Chapter Starts chapter pages on the right side (front pages) of the finished document. Duplex mode (1 2 and 2 2) is compatible with this feature. Color mode Copies full-colored originals or makes single-colored copies, and also adjusts image quality of the copies. Combination Copies a fixed number (2, 4, or 8) of pages onto one sheet of copy paper to create a draft copy of a multi-page report. Copy density Manually selects up to nine density levels. 356 A Features ENWW