Yamaha LS9-32 Owner's Manual - Page 100
Move the cursor to the CLOSE button and, press the [ENTER] key to return to the pre
View all Yamaha LS9-32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Changing the input patching 3 Move the cursor to the port select popup button for the desired channel, and press the [ENTER] key. The INPUT PORT SELECT popup window will appear, allowing you to select the input port for the input channel. This popup window contains the following items. 1 2 4 Use the category tabs and the port select buttons to select the input-source port. 5 Move the cursor to the CLOSE button and press the [ENTER] key to return to the previous screen. HINT • As an alternative to using the CLOSE button, you can return to the previous screen by pressing the SELECTED CHANNEL section [HOME] key once. 6 If necessary, perform the same steps for other input channels. LS9-16 1 Category tab These tabs select the input ports that are shown in the popup window. Each tab corresponds to the following input ports. ● IN 1-16 {1-32} Shows INPUT jacks 1-16 {1-32}. ● SLOT {1/2} Shows input channels 1-16 of the slot(s) {1/2}. ● RACK Shows the outputs of racks 1-8. Use this when you want to send the output of a GEQ or effect to an input channel. HINT • For details on GEQ and effects, refer to p.157. ● 2TR IN/PB OUT Shows the 2TR IN DIGITAL jack and the USB memory recorder's output. Use this when you want to send the input signal from the 2TR IN DIGITAL jack or the output signal of the USB memory recorder to an input channel. B Port select button This selects the input port that is assigned to the channel. 100 LS9-16/32 Owner's Manual