Yamaha LS9-32 Owner's Manual - Page 197

Console lock Console lock You can temporarily prohibit console operations in order to prevent unwanted operation. This setting completely disables operations of the panel and touch screen, so that controls cannot be operated by an accidental touch or by an unauthorized third party while the operator is taking a break. If a password is set for the currently logged-in user, that password will be used for the Console Lock function. If you power-cycle the console while it is locked, you will be asked to enter the password if you had been logged-in as a user for whom a password is assigned. If you had been logged-in as the Guest, the console will start up normally. NOTE • If you have forgotten the password, refer to "Initializing the LS9's internal memory" (→ p. 222). • The Guest cannot set a password. • Even while the console is locked, control from an external device via MIDI or LS9 Editor will still operate as usual. Locking the console 1 In the DISPLAY ACCESS section, press the [SETUP] key repeatedly to access the MISC SETUP screen. 3 Enter the password of the logged-in user, move the cursor to the OK button, and press the [ENTER] key. The CONSOLE LOCK screen will appear, the Console Lock function will be enabled, and all controls will become inoperable. HINT • If an image file is loaded from USB memory, the CONSOLE LOCK screen will show that image. CONSOLE LOCK button 2 Move the cursor to the CONSOLE LOCK button and press the [ENTER] key. If you are logged-in as a user for whom a password is set, a keyboard window will appear, allowing you to enter the password. For details on entering a password, refer to "Assigning a name" (→ p. 34). 19 User settings (Security) LS9-16/32 Owner's Manual 197