Yamaha LS9-32 Owner's Manual - Page 159
ENTER] key., sor to the OK button, and press
View all Yamaha LS9-32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
About the virtual rack C MODULE SELECT buttons Use these buttons to select the GEQ or effect that will be mounted in the rack. Each button has the following function. ● BLANK button Removes the GEQ or effect currently mounted in the rack; the rack will be empty. ● 31 Band GEQ button Mounts a 31 Band GEQ in the rack. ● Flex15GEQ button Mounts a Flex15GEQ in the rack. ● EFFECT button Mounts an effect in the rack. This button will not operate for racks 1-4. HINT • Input/output patching will be cleared if you change the item that is mounted or remove the mounted item. D CANCEL button Cancels the changes you made in the RACK MOUNTER popup window, and closes the window. E OK button Applies the changes you made in the RACK MOUNTER popup window, and closes the window. NOTE • Be aware that if you remove a GEQ or effect that was mounted in a rack and close the window, all parameter settings for that GEQ or effect will be discarded. If you have not yet closed the window, you can recover the settings by mounting the same GEQ or effect once again. HINT • You can also display the RACK MOUNTER popup window by moving the cursor to a vacant rack in the GEQ/EFFECT field and pressing the [ENTER] key. 3 Use the MODULE SELECT buttons to select the item you want to mount, move the cursor to the OK button, and press the [ENTER] key. 4 To select the input source for a rack, move the cursor to the INPUT button for that rack and press the [ENTER] key. The OUTPUT CH SELECT popup window will appear, allowing you to select the input source for the rack. 1 2 3 1 Channel select tabs These tabs switch the type of channels that are shown in the lower part of the window. B Channel select buttons Use these buttons to select the input source. Use the three tabs to switch between groups of input sources shown in the window. C CLOSE button Closes the popup window. The following input sources can be selected in this popup window. Tab name OUT CH (*1) CH 1-32 (INSERT OUT) OUT CH (INSERT OUT) Button name MIX 1-16 MTRX 1-8 ST L, ST R, MONO CH 1-32 MIX 1-16 MTRX 1-8 ST L, ST R, MONO Input source MIX channel 1-16 outputs MATRIX channel 1-8 outputs STEREO (L/R) channel output, MONO (C) channel output INPUT channel 1-32 Insert Outs MIX channel 1-16 Insert Outs MATRIX channel 1-8 Insert Outs STEREO (L/R) channel Insert Out, MONO (C) channel Insert Out *1: This cannot be selected for 31 Band GEQ or Flex15GEQ. 17 Graphic EQ and effects HINT • If you select Insert Out of a channel as the input source for 31 Band GEQ or Flex15GEQ, the Insert In of that same channel will automatically be selected as the output destination for that rack. When you defeat an Insert Out, the Insert In will also be defeated automatically. For details on Insert Out/In, refer to "Inserting an external device into a channel" (→ p. 101). LS9-16/32 Owner's Manual 159