Yamaha LS9-32 Owner's Manual - Page 171
the EFFECT CUE button to turn it on., played effect, turn the BYPASS button on.
View all Yamaha LS9-32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
About the internal effects B Use the dial or the cursor keys to move the cursor, and select the new effect type. You can move the cursor up or down to select a new type in steps of twelve. If you decide not to change the effect type, use the cursor keys to move the cursor to the CLOSE button, and press the [ENTER] key. C When you've selected a new effect type, press the [ENTER] key. The EFFECT TYPE popup window will close automatically, and the new effect is now available for use. HINT • You can also switch the effect type by recalling a library setting. NOTE • Effect types "HQ.PITCH" and FREEZE" can be used only in rack 5 or 7. Also, even if you copy these two effect types, you will not be able to paste them to rack 6 or 8. ● PLAY/REC This is shown if FREEZE is selected as the effect type. 1 1 PLAY button / REC button These buttons are used to record (sample) and play back when using the freeze effect. For details on how to use this, refer to "Using the Freeze effect" (→ p. 173). ● SOLO This is shown if M.BAND DYNA. or M.BAND COMP. is selected as the effect type. 4 To edit the effect parameters, move the cursor to the knobs in the effect parameter field, and use the dial or the [DEC]/[INC] keys. HINT • For details on the parameters of each effect type, refer to the supplementary material at the end of this manual (→ p. 233). 5 Edit the settings in the special parameter field as necessary. For some effect types, parameters such as the following will appear in the special parameter field. ● TEMPO This is shown if a tempo-type or modulation-type effect is selected. 1 2 1 MIDI CLK button If you turn this button on, the BPM parameter of that effect will be set to match the tempo of the MIDI timing clock being input from the currentlyenabled MIDI port. B BPM knob This knob sets the BPM parameter manually. You can also assign the Tap Tempo function to a userdefined key, and set the BPM using it (→ p. 172). 1 2 1 HIGH/MID/LOW buttons These buttons pass only the selected frequency band (multiple selections are allowed). B Gain reduction meters These show the amount of gain reduction for each band. 6 If you want to monitor only the output signal of the currently displayed effect, press the EFFECT CUE button to turn it on. HINT • If the Cue mode is set to MIX CUE mode (in which all channels whose [CUE] keys are on will be mixed for monitoring), only the output signal of the effect will be monitored when you turn on the EFFECT CUE button. (The [CUE] keys that had been turned on until then will be temporarily defeated.) 17 Graphic EQ and effects 7 If you want to bypass the currently displayed effect, turn the BYPASS button on. 8 If you want to copy the currently-displayed effect settings to the effect of another rack, or to initialize the settings, you can do so using the tool buttons at the top of the screen. For details on how to use these buttons, refer to "Using the tool buttons" (→ p. 35). HINT • Effect settings can be stored and recalled at any time using the effect library (→ p. 174). LS9-16/32 Owner's Manual 171