Yamaha LS9-32 Owner's Manual - Page 64
Using a popup window, SEND popup button, Channel number / Channel name, PRE button
View all Yamaha LS9-32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Sending the signal from an input channel to a MIX bus Using a popup window In this method, you use the MIX SEND popup window to adjust the send levels from eight channels to a MIX bus. 1 Make sure that an output port is assigned to the MIX bus to which you're sending the signal, and that a monitor system or external effect processor etc. is connected to the corresponding output port. 2 Press the SELECTED CHANNEL section [HOME] key. The SELECTED CH VIEW screen will appear in the display. 1 The MIX SEND popup window shows the parameters for the eight channels that include the channel you selected in step 3. The contents of the window will differ depending on whether the send-destination MIX bus is VARI type or FIXED type. [ For a VARI type MIX bus ] 56 1 2 3 4 1 SEND popup button 3 Use the LAYER section keys and the [SEL] keys of the channel module section or ST IN section to select the send-source input channel. 4 Use the MIX/MATRIX SELECT section keys to select the send-destination MIX bus. 5 Move the cursor to the SEND popup button in the screen, and press the [ENTER] key to access the MIX SEND popup window. In the MIX SEND popup window you can control the send level, on/off setting, and send point for the signals sent from a set of eight input channels to the currently selected MIX bus. HINT • If you've turned on POPUP APPEARS WHEN PRESSING KNOBS in the PREFERENCE popup window (→ p. 194), you can also access the above popup window by pressing the SELECTED CHANNEL section [SELECTED SEND] encoder. • If you want to switch the on/off status of the signal sent to a VARI type MIX bus, you can move the cursor to the TO MIX LEVEL knob in the screen and press the [ENTER] key to access the above popup window. 1 Channel number / Channel name This indicates the number and name of the sendsource channel. B PRE button This switches the position from which the signal is sent from the send-source channel to the currently selected MIX bus. If this button is on, the pre-EQ or pre-fader signal will be sent; if this button is off, the signal from immediately after the [ON] key will be sent. C TO MIX ON/OFF button This is an on/off switch for the signal that is sent from the send-source channel to the currently selected MIX bus. D TO MIX LEVEL knob This adjusts the level of the signal that is sent from the send-source channel to the currently selected MIX bus. E ALL PRE button This button selects PRE as the position from which the signals are sent from all input channels to the VARI type MIX bus. F ALL POST button This button selects POST as the position from which the signals are sent from all input channels to the VARI type MIX bus. If the send-destination MIX bus is set to stereo, the screen will change as follows. 7 64 LS9-16/32 Owner's Manual