Yamaha LS9-32 Owner's Manual - Page 124
The Channel Link function, Linking the desired input channels
View all Yamaha LS9-32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
The Channel Link function The Channel Link function Channel Link is a function that links the operation of parameters such as fader and EQ between input channels. The parameters to be linked can be selected from the following choices. • HA GAIN settings (linked while preserving the difference in level.) • EQ settings • Dynamics 1 and 2 settings • On/off status of signals sent to MIX buses • Send levels of signals sent to MIX buses • Fader operations (linked while preserving the difference in level.) • [ON] key operations Two or more input channels that are linked are called a "link group." The maximum number of link groups you can create, and the maximum number of input channels that can be included in each group, is 18 {34}. However, the selection of parameters for which operations of a channel are linked for multiple link groups is shared by all link groups. Linking the desired input channels Here's how to link specific parameters of input channels. HINT • Channel link settings are saved as part of the scene. • Recall Safe does not affect channel link. When you recall a scene, the link status saved in that scene will always be reproduced. 1 In the DISPLAY ACCESS section, press the [CHANNEL JOB] key repeatedly to access the CH LINK screen of the CHANNEL JOB screens. 1 2 3 1 Channel display field When you create a link group, the corresponding channels will be highlighted. If there are two or more link groups, each group is shown in a different color. HINT • For ST IN channels, all parameters of L and R are always linked. B LINK PARAMETER field Use the buttons in this field to select the parameters that you want to be linked. These settings are shared by all link groups. C SEND PARAMETER field If you have turned on the MIX ON or MIX SEND buttons in the LINK PARAMETER field, use the buttons of this field to specify the send-destination bus(es). 2 Use the buttons of the LINK PARAMETER field to select the parameter(s) that will be linked (multiple selections are allowed). The table below lists the parameters you can select in the LINK PARAMETER field. HA button EQ button DYNA 1, 2 buttons MIX ON button MIX SEND button FADER button CH ON button Head amp settings EQ settings (including ATT/HPF) Dynamics 1 and 2 settings On/off status of signals sent to MIX buses Send levels of signals sent to MIX buses Fader operations [ON] key operations HINT • If you link Dynamics 1 or 2 for two or more input channels, the parameter values will be linked, but the key-in signals are not linked. For more about dynamics, refer to "EQ and Dynamics" (→ p. 115). • If you turn on the EQ button or DYNA 1/2 buttons, library recall operations will also be linked. 124 LS9-16/32 Owner's Manual