Yamaha LS9-32 Owner's Manual - Page 93
To recall the custom fader layer you've cre, ated, press the LAYER [CUSTOM FADER]
View all Yamaha LS9-32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Assigning channels to the custom fader layer 1 Channel module select field Select the channels that will be assigned to the top panel channel modules 1-16 {1-32}. B ST IN channel select field Select the channels that will be assigned to the top panel ST IN channels 1-2 {1-4}. 3 Move the cursor to the channel module select field or the ST IN channel select field, use the dial or the [DEC]/[INC] keys to select the channel that you want to assign to that field, and press the [ENTER] key. The field will show the name of the selected channel. The following channels can be selected for each field. ● Channels that can be selected in the channel module select field • INPUT channels 1-32 {1-64} • ST IN channels 1-4 • STEREO channel • MONO channels • MIX channels 1-16 • MATRIX channels 1-8 • MONITOR LEVEL If you select a ST IN channel 1-4 or the STEREO channel in the channel module select field, the L/R channels will be assigned together. In this case, the channel module will operate as follows. • The fader and [ON] key will operate the L and R channels together. • The L and R channels will be selected alternately each time you press the [SEL] key. • The meter LEDs will indicate the signal level of the L or R channel, whichever level is greater. If you select one of a pair of MIX/MATRIX channels set to stereo in the channel module select field, the channel module will operate as follows. • The fader and [ON] key will operate the two MIX/MATRIX channels together. • Pressing the [SEL] key will select only the MIX/ MATRIX channel that you assigned. • The meter LEDs will indicate the signal level of the L or R channel, whichever level is greater. ● Channels that can be selected in the ST IN channel select field • ST IN channels 1-4 HINT • As an alternative to using the dial or the [DEC]/[INC] keys, you can move the cursor to the field you want to edit and press a [SEL] key to select a channel. 4 Assign channels to other fields in the same way. 5 To recall the custom fader layer you've created, press the LAYER [CUSTOM FADER] key in the LAYER section. The channels you selected in step 3 will be assigned to the channel module section and ST IN channel section of the panel. HINT • Custom fader layer settings are remembered for each user. 8 When a user logs-in, their previous settings will be repro- duced. Custom fader layer LS9-16/32 Owner's Manual 93