Yamaha LS9-32 Owner's Manual - Page 117
Using dynamics, or HPF ON/OFF button in the ATT/HPF/EQ
View all Yamaha LS9-32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Using EQ • Using dynamics 6 If you want to use the high-pass filter on an input channel, operate the HPF FREQ knob or HPF ON/OFF button in the ATT/HPF/EQ popup window. Input channels provide a high-pass filter that is independent of the four-band EQ. Use the HPF ON/OFF button to switch the high-pass filter on/off, and use the HPF FREQ knob to specify the cutoff frequency. HINT • Output channels do not provide a high-pass filter that is independent of the EQ. However by turning on the high-pass filter button in the popup window, you can use the LOW band EQ as a high-pass filter. • For both input channels and output channels, you can turn on the low-pass filter button and use the HIGH band EQ as a low-pass filter. 7 If you want to initialize EQ settings or copy them to another channel, use the tool buttons in the ATT/HPF/EQ popup window. For details on how to use these buttons, refer to "Using the tool buttons" (→ p. 35). HINT • You can also use a dedicated library to save or load EQ settings at any time (→ p. 120). You can also take advantage of a wide variety of presets suitable for various instruments or situations. • You can also use the encoders of the SELECTED CHANNEL section to adjust the EQ or high-pass filter (→ p. 87). Using dynamics Input channels provide two dynamics processors, and output channels provide one dynamics processor. 1 Press the SELECTED CHANNEL section [HOME] key. The SELECTED CH VIEW screen will appear in the display. 3 Press a [SEL] key in the channel module section, STEREO MASTER section, or ST IN section to select the channel that you want to operate. 21 4 In the screen, move the cursor to the DYNA1/DYNA2 popup button or any knob in the DYNA1/DYNA2 field, and press the [ENTER] key. The DYNAMICS 1/DYNAMICS 2 popup window will appear. In this popup window you can view and edit all dynamics parameters of the currently selected channel. HINT • If you've turned on POPUP APPEARS WHEN PRESSING KNOBS in the PREFERENCE popup window (→ p. 194), you can also access the above popup window by pressing any of the [DYNAMICS 1]/[DYNAMICS 2] encoders while the SELECTED CH VIEW screen is shown. EQ and Dynamics 11 1 DYNA1 popup button B DYNA2 popup button (input channels only) 2 Use the LAYER section to select the desired fader layer. LS9-16/32 Owner's Manual 117