Yamaha LS9-32 Owner's Manual - Page 68
STEREO channel / MONO C channel, MATRIX channels 1-8, TO MATRIX ON/OFF MATRIX send on/off
View all Yamaha LS9-32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Signal flow for output channels ■ STEREO channel / MONO (C) channel Each of these channels process the signal sent from the input channels to the STEREO bus or MONO (C) bus, and send it to an output port or MATRIX bus. If input channels are set to LCR mode, the STEREO (L/R) channels and the MONO (C) channel can be used together as a set of three output channels. When the LS9 is in the initial state, the STEREO channel is assigned to the 2TR OUT DIGITAL jack. MIX 1 2 ...15 16 M O ST N O MATRIX CUE L R (C) 1 2 ... 7 8 L R STEREO L,R,MONO(C) To RACKIN PATCH To OUTPUT PATCH STEREO INSERT OUT L,R,MONO(C) STEREO INSERT IN L,R,MONO(C) INSERT POINT PRE FADER INSERT OUT PRE EQ INSERT OUT PRE EQ METER EQ OUT METER DYNA OUT PRE FADER METER METER POST ON METER CUE ON MATRIX1,3...7 MATRIX2,4...8 INSERT ATT 4BAND EQ PRE EQ POST EQ PRE EQ INSERT OUT GR METER LEVEL BAL COMP COMPAND INSERT ON EXPAND Keyin PRE FADER INSERT OUT PRE FADER To STEREO OUT L+C,R+C Self PRE EQ/Self POST EQ/MIX13-16 OUT/ ST(L,R,MONO(C)) POST EQ LEVEL ON LEVEL ON (PRE FADER)PFL / (POST ON)AFL PRE FADER / POST ON To MATRIX VARI STEREO OUT L STEREO OUT MONO(C) STEREO OUT L,R,MONO(C) POST ON To OUTPUT PATCH To MONITOR SELECT To RECORDER IN PATCH STEREO OUT L+C To OUTPUT PATCH To RECORDER IN PATCH LEVEL ON PAN PRE FADER / POST ON To MATRIX VARI STEREO STEREO OUT R STEREO OUT R+C To OUTPUT PATCH To RECORDER IN PATCH ■ MATRIX channels 1-8 These channels process the signals sent from MIX channels and STEREO/MONO channels to MATRIX buses, and send them to the corresponding output ports. MIX 1 2 ...15 16 M O ST N O MATRIX CUE L R (C) 1 2 ... 7 8 L R MATRIX1-8 To RACKIN PATCH To OUTPUT PATCH MATRIX INSERT OUT 1-8 MATRIX INSERTIN1-8 INSERT POINT PRE FADER INSERT OUT PRE EQ INSERT OUT PRE EQ METER EQ OUT METER DYNA OUT PRE FADER METER METER CUE ON GR METER LEVEL ON INSERT ATT 4BAND EQ COMP COMPAND EXPAND INSERT PRE EQ POST EQ PRE EQ INSERT OUT Keyin PRE FADER INSERT OUT PRE FADER Self PRE EQ/Self POST EQ/MIX13-16 OUT/ MATRIX1-8 POST EQ (PRE FADER)PFL / (POST ON)AFL POST ON METER MATRIX OUT 1-8 To OUTPUT PATCH To MONITOR SELECT To RECORDER IN PATCH POST ON ● ATT (attenuator) Attenuates/boosts the level of the signal. ● 4 BAND EQ (4 band equalizer) This is a parametric EQ with four bands; HIGH, HIGH MID, LOW MID, and LOW. ● COMP/COMPANDER/EXPAND (compressor/compander/expander) This is a dynamics processor that can be used as a compressor, compander, or expander. ● LEVEL This adjusts the output level of the channel. ● BALANCE (STEREO channel only) Adjusts the left/right volume balance of the STEREO (L/ R) channel. ● ON (on/off) Turns the output channel on/off. If this is off, the corresponding channel is muted. ● TO MATRIX ON/OFF (MATRIX send on/off) This is an on/off switch for the signal sent from the MIX channels, STEREO (L/R) channel, or MONO (C) channel to each MATRIX bus 1-8. ● TO MATRIX LEVEL 1-8 (MATRIX send levels 1-8) This adjusts the send level of the signal sent from the MIX channels, STEREO (L/R) channel, or MONO (C) channel to each MATRIX bus 1-8. As the position from which the signal is sent to the MATRIX bus, you can choose either pre-fader or after the [ON] key. 68 LS9-16/32 Owner's Manual