Yamaha LS9-32 Owner's Manual - Page 102
press the [ENTER] key to return to the pre, buttons to select the insert-out port.
View all Yamaha LS9-32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Inserting an external device into a channel E Output port select popup button F Input port select popup button These buttons select the output port and input port that are patched to insert-out and insert-in. The currently selected output port and input port are shown. G INSERT ON/OFF button This button turns the insert on/off. To switch this on/ off, move the cursor to this button and use the [DEC]/ [INC] keys or the [ENTER] key. 4 Move the cursor to the output port select popup button, and press the [ENTER] key. The OUTPUT PORT SELECT popup window will appear, allowing you to select the output port that will be patched to insert-out. 1 2 LS9-16 1 Category tab These tabs select the output ports that are shown in the popup window. Each tab corresponds to the following output ports. ● SLOT {1/2} Shows output channels 1-16 of the slot(s) {1/2}. ● RACK Shows the inputs of racks 1-8. Use these when you want to insert a GEQ or effect into that channel. B Port select button This selects the output port that is assigned to insertout. 5 Use the category tabs and the port select buttons to select the insert-out port. 6 Move the cursor to the CLOSE button and press the [ENTER] key to return to the previous screen. HINT • After moving the cursor to the insert-out patch select box in step 4, you can also select the output port by using the dial or the [DEC]/[INC] keys instead of pressing the [ENTER] key. 7 Move the cursor to the input port select popup button, and press the [ENTER] key. The INPUT PORT SELECT popup window will appear, allowing you to select the input port that will be patched to insert-in. 1 2 LS9-16 1 Category tab These tabs select the input ports that are shown in the popup window. Each tab corresponds to the following input ports. ● SLOT {1/2} Shows input channels 1-16 of the slot(s) {1/2}. ● RACK Shows the outputs of racks 1-8. Use these when you want to insert a GEQ or effect into the channel. B Port select button This selects the input port that is assigned to insert-in. 8 Use the category tabs and the port select buttons to select the insert-in port. 9 Move the cursor to the CLOSE button and press the [ENTER] key to return to the previous screen. 10 Move the cursor to the insert point select box, and use the dial or the [DEC]/[INC] keys to select the insert point. You can select PRE EQ (immediately before the EQ) or PRE FADER (immediately before the fader). 11 Move the cursor to the INSERT ON/OFF button, and press the [DEC]/[INC] keys or the [ENTER] key to turn it ON. This enables the insertion you specified. 102 LS9-16/32 Owner's Manual