Yamaha LS9-32 Owner's Manual - Page 217
Specifying the brightness or contrast of the display, LEDs, and lamps
View all Yamaha LS9-32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 217 highlights
Setting the network address • Specifying the brightness or contrast of the display, LEDs, and lamps 5 When you have finished making settings, move the cursor to the OK button and press the [ENTER] key. The changes will be finalized, and the popup window will close. If you select the CANCEL button or the × symbol instead of the OK button, your changes will be discarded and the popup window will close. Specifying the brightness or contrast of the display, LEDs, and lamps Here you can specify the contrast and brightness of the display, the brightness of the top panel LEDs, and the brightness of the lamp connected to the rear panel LAMP connector. 1 In the DISPLAY ACCESS section, press the [SETUP] key to access the MISC SETUP screen. 2 Move the cursor to a knob of the CONTRAST/BRIGHTNESS field, and use the dial or the [DEC]/[INC] keys to set the following parameters. ● CONTRAST field • SCREEN knob ........ Specifies the contrast of the display backlight. HINT • You can also adjust the contrast by holding down the [HOME] key and turning the dial. 1 1 CONTRAST field B BRIGHTNESS field LS9-32 2 ● BRIGHTNESS field • SCREEN knob ........ Specifies the brightness of the display backlight. • PANEL knob ........ Adjusts the brightness of the top panel LEDs. If a Yamaha AD8HR is connected to an I/O card that provides a REMOTE connector, the brightness of the AD8HR's LEDs will also change. • LAMP knob (LS9-32 only) ........ Adjusts the brightness of the lamp connected to the rear panel LAMP jack. 20 Other functions LS9-16/32 Owner's Manual 217