Yamaha LS9-32 Owner's Manual - Page 74
the [SEL] key to select that channel, and, currently shown in the popup window, use
View all Yamaha LS9-32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Sending signals from MIX channels to the STEREO/MONO bus Signal level If the CSR knob is set to 100%, operating the TO ST PAN knob will change the signal levels sent to the STEREO (L/R) bus and MONO (C) bus as shown in the following illustration. Signal sent to the MONO (C) bus Signal sent to the STEREO (L) bus Signal sent to the STEREO (R) bus L C R PAN knob If a stereo MIX channel is selected, operating the TO ST BALANCE knob will change the signal levels sent from the MIX channel to the STEREO (L/R) bus and MONO (C) bus as shown in the following illustration. 14 If you want to operate a channel that is not currently shown in the popup window, use the [SEL] key to select that channel, and then make settings for it. For example if MIX channels 1-8 are shown in the popup window, pressing the MIX channel 9 [SEL] key will change the popup window to MIX channels 9-16. 15 When you've finished making settings, move the cursor to the CLOSE button (or the × symbol in the upper right of the window) and press the [ENTER] key. Signal level L C R TO ST BALANCE knob Signal sent from the odd-numbered MIX channel to the STEREO (L) bus Signal sent from the odd-numbered MIX channel to the MONO (C) bus Signal level L C R TO ST BALANCE knob Signal sent from the even-numbered MIX channel to the MONO (C) bus Signal sent from the even-numbered MIX channel to the STEREO (R) bus 74 LS9-16/32 Owner's Manual