Yamaha LS9-32 Owner's Manual - Page 163
Using the 31 Band GEQ, OFF button to turn on the 31-band GEQ.
View all Yamaha LS9-32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
Graphic EQ operations 6 To turn on the GEQ, move the cursor to the GEQ ON/OFF button and press the [ENTER] key. After you've turned the GEQ on, adjust the bands of the GEQ. For details on operating the GEQ, refer to "Using the 31 Band GEQ" (below) or "Using the Flex15GEQ" (→ p. 164). 7 Check whether INSERT is turned on for the patched channel. For details, refer to "Inserting an external device into a channel" (→ p. 101). Using the 31 Band GEQ Here we will explain how to use the 31 Band GEQ. 1 As described in steps 1-3 of "Mounting a GEQ or effect in the virtual rack" (→ p. 158), mount a GEQ in a rack. A rack in which a 31 Band GEQ is mounted will show the approximate settings. Rack image display 2 In the GEQ/EFFECT field, move the cursor to the rack in which you mounted the GEQ and press the [ENTER] key. The RACK screen will appear, allowing you to edit the parameters of the GEQ. You can also access the RACK screen by pressing the [RACK 1-4] key or [RACK 5-8] key. By repeatedly pressing the [RACK 1-4] key you can access the RACK 1-4 screens, and by repeatedly pressing the [RACK 5-8] key you can access the RACK 5-8 screens and EXTERNAL HA screen. 4 56 7 8 1 2 1 EQ graph This indicates the approximate response of the current 31 Band GEQ settings. B Faders These faders indicate the amount of boost/cut for each band of the 31 Band GEQ. The frequency and value for the fader currently selected by the cursor are shown below the fader. C FADER ASSIGN field Use this field when you want to operate the boost/cut amount for each band using the top panel faders. D GEQ ON/OFF button Switches the currently selected GEQ on/off. E FLAT button This returns all bands of the currently selected GEQ to 0 dB. F INPUT button This button displays the OUTPUT CH SELECT popup window, where you can select the input source of the rack. G OUTPUT button This button displays the INPUT CH SELECT popup window, where you can select the output destination of the rack. H GEQ LINK button This button links adjacent GEQ units. NOTE • The GEQ LINK button is shown only if linking is possible. For a 31 Band GEQ, this button is displayed if a 31 Band GEQ is mounted in two adjacent odd-numbered/even-numbered racks. 3 After you've set the input-source and output-destination correctly, use the GEQ ON/ OFF button to turn on the 31-band GEQ. 4 To adjust the boost/cut of each band, move the cursor to the desired fader and operate the dial or the [DEC]/[INC] keys. 17 Graphic EQ and effects 5 If you want to use the top panel faders to adjust the boost/cut of each band, proceed as follows. 1 Move the cursor to the button in the FADER ASSIGN field and press the [ENTER] key. When this button is turned on, the faders in the screen will turn white, and you will be able to use the top panel faders to adjust the GEQ bands. 3 LS9-32 LS9-16/32 Owner's Manual 163