Yamaha LS9-32 Owner's Manual - Page 101
Inserting an external device into a channel, Press the [HOME] key to access - diagrams
View all Yamaha LS9-32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Inserting an external device into a channel Inserting an external device into a channel If necessary, you can insert an internal effect/GEQ or an external device such as an effect processor into the signal path of INPUT channels 1-32 or any output channel (MIX, MATRIX, STEREO, MONO). When doing so, the type of input/output port used for the insertion and the signal patch location of the insertion can be specified individually for each channel. Here we will explain how an external device connected to an I/O card in a slot can be inserted into the desired channel. 1 Connect your external device to the I/O card installed in a slot {1/2}. DIGITAL OUT DIGITAL IN Digital I/O card DIGITAL OUT DIGITAL IN Effect processor 3 Move the cursor to the INSERT popup button in the screen, and press the [ENTER] key. NOTE • For the INPUT channels, insert connections can be made only for channels 1-32. If an INPUT channel 33-64 is selected on the LS9-32, the INSERT popup button is not shown. The INSERT popup window will appear. In this popup window, you can view the insert input/output port, 9 change the insert position and switches the insert on/ off, in groups of eight channels. Input/output patching LS9 NOTE • If you install a digital I/O card in a slot and digitally connect an external device, you must synchronize the word clock of the LS9 and the external device (→ p. 46). 2 Press the [HOME] key to access the SELECTED CH VIEW screen, and use the [SEL] keys to select the channel into which you want to insert an external device. 1 1 2 3 4 5 7 6 1 Channel block diagram This shows the direct output position (only for INPUT channels) and the position of the insert connection for the selected channel. B Channel number This is the channel number. C Channel name This is the channel name. D Insert point select box This selects the insert point for the signal. Move the cursor to this box and use the dial or the [DEC]/[INC] keys to switch between PRE EQ (immediately before the EQ) or PRE FADER (immediately before the fader). 1 INSERT popup button LS9-16/32 Owner's Manual 101