Yamaha LS9-32 Owner's Manual - Page 147
and press the [ENTER] key to close the, popup window.
View all Yamaha LS9-32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
Using the Monitor function If you've selected DEFINE in the SOURCE SELECT field, you can use the ASSIGN field to select multiple sources. The following table shows the monitor sources you can select in the ASSIGN field. MIX 1-16 buttons MATRIX 1-8 buttons STEREO L/R button MONO button 2TR L/R button INPUT 15/16 {31/32} button PLAYBACK OUT button MIX channels 1-16 output signals MATRIX buses 1-8 output signals STEREO L/R channel output signal MONO channel output signal 2TR IN DIGITAL jack input signal INPUT channels 15/16 {31/32} input signal USB memory recorder playback signal NOTE • You can select a maximum of eight monitor sources in the ASSIGN field. If you select eight monitor sources, no further selections will be possible. Please turn off the buttons for unneeded sources. 4 Move the cursor to one of the port select boxes (L/R/C) located below the level meter, and press the [ENTER] key. The OUT PORT SELECT popup window will appear, allowing you to specify the port from which the L, R, and C monitor signals will be output. 6 To output the monitor signal, move the cursor to the OUTPUT button of the MONITOR screen and press the [ENTER] key to turn it on. The monitor source you selected in step 3 will be sent to the output destination you specified in step 5. HINT • The PHONES OUT jack will always output the monitor signal, regardless of whether the OUTPUT button is on or off. 7 Move the cursor to the MONITOR LEVEL knob in the MONITOR screen, and use the dial or the [DEC]/[INC] keys to adjust the monitor level. If PHONES LEVEL LINK is ON, you can use both the MONITOR LEVEL knob and the front panel PHONES LEVEL control to adjust the monitor level when monitoring through headphones. HINT • If PHONES LEVEL LINK is on, the MONITOR LEVEL knob will also affect the PHONES OUT jack. • If you turn on MONITOR ON MASTER FADER that you've assigned to a user-defined key, you'll be able to use the master fader to control the monitor. 8 Make settings for Dimmer and Monaural as desired. HINT • Monitor on/off operations, selection of the monitor source, and dimmer on/off operations can also be assigned to userdefined keys (→ p. 196). 14 Monitor/Cue LS9-16 5 Move the cursor to the output destination port and press the [ENTER] key to select it; then move the cursor to the CLOSE button and press the [ENTER] key to close the popup window. The following table lists the output ports you can select. OMNI 1-8 {1-16} 2TR OUT L/R SLOT {1/2} 1-16 OMNI OUT jacks 1-8 {1-16} 2TR OUT DIGITAL jack L, R Output channels 1-16 of an I/O card installed in a slot {1/2} HINT • If desired, you can specify output ports only for MONITOR OUT L and R, and monitor through two speakers. If you have not specified an output port for MONITOR OUT C, selecting the MONO button or LCR button as the monitor source will automatically cause the MONO channel signal to be distributed to MONITOR OUT L/R. LS9-16/32 Owner's Manual 147