Yamaha LS9-32 Owner's Manual - Page 176
and access the channel that you want to, access the SELECTED CH VIEW screen
View all Yamaha LS9-32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 176 highlights
Using an external head amp 5 Use the PORT SELECT buttons to specify the input ports to which the audio output of the external HA is connected. When you've finished making settings, move the cursor to the CLOSE button and press the [ENTER] key to close the popup window. NOTE • If an external HA is connected to one of the LS9's slots, you must specify the appropriate input port manually. If this is set incorrectly, the external HA will not be detected correctly when you patch input ports to input channels. 6 To remotely control an external HA, move the cursor to the rack in which the external HA you want to control is mounted, and press the [ENTER] key. The EXTERNAL HA popup window will appear. Here you can remotely control the external HA by using the knobs and buttons in the LS9's display or the dial etc. of the top panel. 2 1 3 4 5 7 To remotely control the external HA in an LS9 input channel, press the [HOME] key to access the SELECTED CH VIEW screen, and access the channel that you want to control. 1 1 HA popup button 8 Move the cursor to the HA popup button, and press the [ENTER] key to access the HA/PATCH popup window. 1 1 Rack select buttons These switch the rack that is displayed in the EXTERNAL HA popup window. B +48V MASTER If an external HA is connected to the REMOTE connector, the on/off status of the master phantom power is shown here. (Switching this on/off is performed on the external HA itself.) C +48V buttons These switch phantom power on/off for each channel. D GAIN knobs These indicate the gain of the external HA. Move the cursor to the knob and use the dial or the [DEC]/[INC] keys to adjust the setting. E HPF knobs / ON buttons These controls switch the external HA's built-in highpass filter on/off, and adjust its cutoff frequency. HINT • When you newly connect an AD8HR, the above screen will reflect the state of the AD8HR's settings. • Since the above knobs and buttons will be shown even if an AD8HR is not connected, you can use them to make settings even without the AD8HR, and store these settings in a scene. 1 Input port popup button 9 Press the input port popup button, and select the input port assigned to the external HA. With these settings, the external HA can be used in the same way as the LS9's own HA. For details on the HA/PATCH popup window, refer to "HA (head amp) settings" (→ p. 57). HINT • Settings for the external HA are saved as part of the scene (However, master phantom on/off, HPF on/off, and cutoff frequency settings are excepted). • When you adjust the brightness of the LS9's panel LEDs, this will also affect the LEDs of the external HA. 176 LS9-16/32 Owner's Manual