Yamaha LS9-32 Owner's Manual - Page 257

Functions that can be assigned to user-defined keys Functions that can be assigned to user-defined keys Function NO ASSIGN SCENE TALKBACK OSCILLATOR CUE CLEAR MONITOR EFFECT BYPASS TAP TEMPO MUTE MASTER METER PARAMETER 1 PARAMETER 2 LED Explanation - - Dark No assignment RECALL - Recall the currently selected scene STORE - Store to the currently selected scene ▲ SCENE +1, LIST UP SCENE +1 selects the next scene number. LIST UP scrolls the scene list upward by one. Simultaneously pressing [SCENE ▲] and [SCENE ▼] keys will return to the current scene number. After scene 300, wrap around to scene 000. Flash SCENE -1 selects the previous scene number. LIST UP scrolls the scene list upward by one. Simultaneously press- ▼ SCENE -1, LIST DOWN ing [SCENE ▲] and [SCENE ▼] keys will return to the cur- rent scene number. After scene 000, wrap around to scene 300. INC RECALL - Recall the scene of the next existing number DEC RECALL - Recall the scene of the previous existing number DIRECT RECALL SCENE #000-#300 Directly recall the scene of the specified number RECALL UNDO - Lit if UNDO is possible Execute RECALL UNDO STORE UNDO - Lit if UNDO is possible Execute STORE UNDO TALKBACK ON LATCH UNLATCH ON: lit, OFF: dark ON: lit, OFF: dark Switch TALKBACK on/off Turn TALKBACK on while pressed SELECTED CH ASSIGN - Lit if assignment is the same When you press this key, the previously-stored assignment state will be applied. While holding down this key, press a SEL key of an output channel to switch the assignment on/ off, and its state will be remembered. During this time, the [SEL] LED will be lit if assign is ON, or dark if OFF. OSCILLATOR ON - ON: lit, OFF: dark Switch the OSC on/off When this turns on, the OSC popup window will appear SELECTED CH ASSIGN - Lit if assignment is the same When you press this key, the previously-stored assignment state will be applied. While holding down this key, press a SEL key of an output channel to switch the assignment on/ off, and its state will be remembered. During this time, the [SEL] LED will be lit if assign is ON, or dark if OFF. - - Flash Clear all CUE settings together MONITOR ON - ON: lit, OFF: dark Switch MONITOR on/off SELECTED CH ASSIGN - Lit if assignment is the same When you press this key, the previously-stored assignment state will be applied. While holding down this key, press a SEL key of a MIX or MATRIX channel to switch the assignment on/off, and its state will be remembered. During this time, the [SEL] LED will be lit if assign is ON, or dark if OFF. SOURCE SELECT STEREO L/R, MONO(C), LCR, 2TR IN L/R, INPUT 15/16 {31/32}, PLAYBACK OUT, DEFINE Lit if the selected monitor source is on Recall the selected signal to the monitor DIMMER ON - ON: lit, OFF: dark Switch the monitor dimmer function on/off MONO MONITOR - ON: lit, OFF: dark Switch MONO MONITOR on/off MONITOR ON MASTER FADER - ON: lit, OFF: dark If this is on, you can use the master fader to control the monitor level, and the ON key to switch the monitor output on/off RACK 5-8 - ON: lit, OFF: dark Bypass the specified effect CURRENT PAGE - RACK 5-8 - Blink in synchroniza- Use the tap tempo function in the displayed screen tion to the tempo Use the tap tempo function for the specified effect MUTE GROUP 1-8 - ON: lit, OFF: dark Switch MUTE GROUP MASTER on/off PEAK HOLD ON - ON: lit, OFF: dark Turn the meter PEAK HOLD function on/off STEREO/MONO(C) SEL - MONO (C): lit, STEREO: dark Switch the top panel STEREO L/R METER function Appendices LS9-16/32 Owner's Manual 257