Yamaha LS9-32 Owner's Manual - Page 243

■ M.BAND COMP Two input, two output 3-band compressor, with individual solo and gain reduction metering for each band. Parameter LOW GAIN MID GAIN HI. GAIN L-M XOVR M-H XOVR SLOPE CEILING LOOKUP LOW THRE MID THRE HI. THRE RATIO ATTACK RELEASE KNEE BYPASS Range -96.0 to +12.0 dB -96.0 to +12.0 dB -96.0 to +12.0 dB 21.2 Hz-8.00 kHz 21.2 Hz-8.00 kHz -6 dB, -12 dB -6.0 dB to 0.0 dB, OFF 0.0-100.0 ms -54.0 dB to 0.0 dB -54.0 dB to 0.0 dB -54.0 dB to 0.0 dB 1:1 to 20:1 0-120 ms *1 0-5 OFF/ON Description Low band level Mid band level High band level Low/mid crossover frequency Mid/high crossover frequency Filter slope Specifies the maximum output level Lookup delay Low band threshold level Mid band threshold level High band threshold level Compression ratio Compressor attack time Compressor release time Compressor knee Bypasses the compressor *1. 6.0 ms-46.0 s (fs=44.1 kHz), 5.0 ms-42.3 s (fs=48 kHz) ■ REV-X HALL, REV-X ROOM, REV-X PLATE Newly-developed two input, two output reverb algorithm. Delivers dense and rich reverberation, smooth decay, and provides a spaciousness and depth that enhances the original sound. Choose from three types depending on your location and needs; REV-X HALL, REV-X ROOM, and REV-X PLATE. Parameter REV TIME INI. DLY HI. RATIO LO. RATIO Range 0.28-27.94 s*1 0.0-120.0 ms 0.1-1.0 0.1-2.4 LO.FREQ 22.0 Hz-18.0 kHz DIFF. ROOM SIZE DECAY HPF LPF 0-10 0-28 0-53 THRU, 22.0 Hz- 8.00 kHz 1.00 kHz- 18.0 kHz, THRU Description Reverb time Initial delay before reverb begins High-frequency reverb time ratio Low-frequency reverb time ratio Frequency point for LO.RATIO setting Reverb diffusion (left-right reverb spread) Size of room Gate closing speed High-pass filter cutoff frequency Low-pass filter cutoff frequency *1. These values are for when the effect type is REV-X HALL and the ROOM SIZE=28. The range will differ depending on the effect type and ROOM SIZE setting. Effects Parameters Appendices LS9-16/32 Owner's Manual 243