Yamaha LS9-32 Owner's Manual - Page 155
Meters, Using the METER screen,
View all Yamaha LS9-32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
Chapter 16 Meters This chapter describes the meter screen which displays input/output level meters for all channels. Using the METER screen By accessing the Meter screen you can view the input/output levels of all channels in the screen, and switch the metering point (the location at which the level is detected) of the level meters. 1 In the DISPLAY ACCESS section, press the [METER] key to access the Meter screen. [ CUSTOM FADER screen ] The Meter screen is divided into the METER CH1-32 screen, {METER CH 33-64 screen}, OUTPUT 4 METER screen, and CUSTOM FADER screen. 2 [ METER CH1-32 screen ] 5 1 [ OUTPUT METER screen ] 2 LS9-16 1 Metering point select buttons Use these three buttons to select the metering point for 3 the input/output channels. B Level meters These show the input/output levels or fader values. The current fader value is shown in a range of -∞-10. When you operate the corresponding fader, the value will change in realtime. 16 Meters 1 The ∑ segment will light if even one of the level detec- tion points within each channel is overloaded. The ∑ segment level detection points are as follows. 2 • Input channels ........... PRE HPF, PRE FADER, POST ON • Output channels PRE EQ, PRE FADER, POST ON C PEAK HOLD button If you turn this button on, the peak levels of the meters 3 will be held. When you turn this button off, the peak level indications that had been held will be cleared. LS9-16/32 Owner's Manual 155