Yamaha LS9-32 Owner's Manual - Page 104
Move the cursor to the DIRECT OUT ON, select box, and use the dial or the [DEC]
View all Yamaha LS9-32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Directly outputting an INPUT channel 4 Move the cursor to the port select popup button, and press the [ENTER] key. The OUTPUT PORT SELECT popup window will appear, allowing you to select the output port that will be patched to direct output. 1 2 8 Move the cursor to the DIRECT OUT ON/ OFF button, and press the [DEC]/[INC] keys or the [ENTER] key to turn it ON. This enables the direct output you specified. 9 As necessary, move the cursor to the DIRECT OUT LEVEL knob and use the dial or the [DEC]/[INC] keys to adjust the level of the direct output. HINT • As an alternate method of specifying a direct output, you can select an INPUT channel as the output source of an output port (→ p. 98). LS9-16 1 Category tab These tabs select the output ports that are shown in the popup window. Each tab corresponds to the following output ports. ● OMNI / 2TR OUT Shows OMNI OUT jacks 1-8 {1-16} and 2TR OUT DIGITAL jack. ● SLOT {1/2} Shows output channels 1-16 of the slot(s) {1/2}. ● REC IN Shows USB memory recorder input channels. B Port select button This selects the output port that is assigned to direct output. 5 Use the category tabs and the port select buttons to select the port that will be the direct output. 6 Move the cursor to the CLOSE button and press the [ENTER] key to return to the previous screen. 7 Move the cursor to the direct out point select box, and use the dial or the [DEC]/ [INC] keys to select the direct out point. You can choose PRE HPF (immediately before the high-pass filter), PRE EQ (immediately before the EQ), or PRE FADER (immediately before the fader). 104 LS9-16/32 Owner's Manual