Yamaha LS9-32 Owner's Manual - Page 61
then make settings for it., the [SEL] key to select that channel,
View all Yamaha LS9-32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Signal level Signal level Sending the signal from an input channel to the STEREO/MONO bus Signal sent to the STEREO (L) bus Signal sent to the STEREO (R) bus L C R TO ST PAN knob If a ST IN channel is selected, operating the TO ST BALANCE knob will change the signal levels sent from the ST IN L/R channels to the STEREO (L/R) bus and MONO (C) bus as shown in the following illustration. In this case, the [PAN] encoder will operate as a conventional BALANCE knob, and no signal is sent to the MONO (C) bus. Signal sent from the ST IN (L) channel to the STEREO (L) bus L C R TO ST BALANCE knob Signal sent from the ST IN (R) channel to the STEREO (R) bus L C R TO ST BALANCE knob If the CSR knob is set to 100%, operating the TO ST PAN knob will change the signal levels sent to the STEREO (L/R) bus and MONO (C) bus as shown in the following illustration. If a ST IN channel is selected, operating the TO ST BALANCE knob will change the signal levels sent from the ST IN L/R channels to the STEREO (L/R) bus and MONO (C) bus as shown in the following illustration. L C R TO ST BALANCE knob Signal sent from the ST IN (L) channel to the STEREO (L) bus Signal sent from the ST IN (L) channel to the MONO (C) bus 5 Signal level Input channel operations Signal level L C R TO ST BALANCE knob Signal sent from the ST IN (R) channel to the STEREO (R) bus Signal sent from the ST IN (R) channel to the MONO (C) bus 15 If you want to operate a channel that is not currently shown in the popup window, use the [SEL] key to select that channel, and then make settings for it. For example if INPUT channels 1-8 are shown in the popup window, pressing the INPUT channel 9 [SEL] key will change the popup window to INPUT channels 9-16. 16 When you've finished making settings, move the cursor to the CLOSE button (or the × symbol in the upper right of the window) and press the [ENTER] key. Signal sent to the MONO (C) bus Signal sent to the STEREO (L) bus Signal sent to the STEREO (R) bus L C R PAN knob Signal level Signal level LS9-16/32 Owner's Manual 61