Yamaha LS9-32 Owner's Manual - Page 96
button, and press the [ENTER] key., Move the cursor to the desired port select
View all Yamaha LS9-32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Changing the output patching 2 Move the cursor to the PATCH popup button in the screen, and press the [ENTER] key. The HA/PATCH popup window will appear. This popup window shows the output port assigned to the output channels, in groups of eight channels. 1 2 3 1 Channel number This is the number of the output channel. B Channel name These are the names of each channel. C Port select popup button This button selects the output port assigned to the channel. The currently selected output port is shown. HINT • Even if multiple output ports are assigned, only one output port is shown. 3 Make sure that the cursor is located at the output port for the desired channel, and press the [ENTER] key. The OUTPUT PORT SELECT popup window will appear, allowing you to select the output port for the output channel. This popup window contains the following items. 1 3 2 LS9-16 1 Category tab This selects the type of output ports that are shown in the lower part of the popup window. Each tab corresponds to the following output ports. ● OMNI/2TR OUT Shows the OMNI OUT jacks 1-8 {1-16} and 2TR OUT DIGITAL jack. ● SLOT {1/2} Shows output channels 1-16 of the slot(s) {1/2}. ● RACK Shows the inputs of racks 1-8. Use this when you want to send the signal of an output channel to the input of a GEQ or effect. HINT • For details on GEQ and effects, refer to p.157. ● REC IN Shows the input of the USB memory recorder. Use this when you want to send the signal of an output channel to the input of the USB memory recorder. B Port select button This selects the output port that is assigned to the corresponding channel. C Level indicator This indicates the state of the port's signal using the following colors. • -60 dB or below black • -60 dB to -18 dB .......... green • -18 dB to 0 dB yellow • OVER red' 4 Move the cursor to the desired tab in the upper part of the window, and press the [ENTER] key. The type of ports shown in the lower part of the window will change according to the tab you selected. 5 Move the cursor to the desired port select button, and press the [ENTER] key. That port will be selected as the output destination. You can select more than one output port. 6 Move the cursor to the CLOSE button and press the [ENTER] key to return to the previous screen. HINT • As an alternative to using the CLOSE button, you can return to the previous screen by pressing the SELECTED CHANNEL section [HOME] key once. 7 If necessary, perform the same steps for other output channels. 96 LS9-16/32 Owner's Manual