Yamaha LS9-32 Owner's Manual - Page 213
Basic settings for MIX buses and MATRIX buses, To close the INPUT PORT SELECT popup
View all Yamaha LS9-32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 213 highlights
Using cascade connections • Basic settings for MIX buses and MATRIX buses 6 If you want to link specific parameters or events between two LS9 consoles, proceed as follows. 1 Move the cursor to the CASCADE LINK PORT field, and use the dial or the [DEC]/[INC] keys to specify the port that will transmit/receive control signals for cascade link. The items you can select are the same as in the CASCADE OUT PATCH popup window (→ p. 211). NOTE • Control signals for cascade link and MIDI messages cannot share the same port. If you select a port that is already specified for transmission/reception of MIDI messages, a dialog box will ask whether it is OK to cancel the existing settings. B Move the cursor to the CASCADE COMM LINK field, and use the dial or the [DEC]/[INC] keys to specify the item(s) you want to link, so that they match the settings of the cascade slave. The items you can select are the same as in the CASCADE OUT PATCH popup window (→ p. 211). 7 To close the INPUT PORT SELECT popup window, move the cursor to the CLOSE button (or the × symbol in the upper right) and press the [ENTER] key. In this state, the bus signals of the cascade slave will be sent via the slot to the buses of the cascade master, and the combined signals of both buses will be output from the cascade master. If the Cascade Link function is enabled, the specified operations or parameter changes performed on either LS9 console will be followed by the other LS9 console. Basic settings for MIX buses and MATRIX buses This section explains how to change the basic settings for MIX buses and MATRIX buses, such as switching between stereo and monaural, and selecting the position from which the signal is sent from an input channel. The settings you make in the following procedure are saved as part of the scene. 1 In the DISPLAY ACCESS section, press the [SETUP] key repeatedly to access the SYSTEM SETUP screen. 2 To make MIX bus settings, move the cursor to the MIX button of the BUS SETUP field and press the [ENTER] key. The MIX BUS SETUP popup window will appear. 1 2 3 1 2 3 20 Other functions 1 BUS SETUP field B MIX button C MATRIX button LS9-32 1 SIGNAL TYPE (Signal processing method) This selects whether two adjacent odd-numbered/ even-numbered MIX buses will be used as stereo channels whose main parameters are linked (STEREO) or as two monaural channels (MONO × 2). LS9-16/32 Owner's Manual 213