Yamaha LS9-32 Owner's Manual - Page 107
ment, move the cursor to the CLOSE button, Assign a channel to the other output in
View all Yamaha LS9-32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Assigning channels to the input/output of the recorder B Channel select buttons Select the channels that will be assigned to the USB memory recorder's inputs, from the following choices. ● MIX 1-16 MIX channels 1-16 ● MTRX 1-8 MATRIX channels 1-8 ● ST L/R STEREO channel L/R ● ST L+C STEREO channel L mixed with the MONO (C) channel ● ST R+C STEREO channel R mixed with the MONO (C) channel ● MONO MONO channel ● CH1-32 {1-64} Direct output of an INPUT channel 1-32 {1-64} 3 Use the category tabs and the port select buttons to select the channel that you want to patch to the USB memory recorder input. If you select a channel to which another port is already patched, a dialog box will ask you to confirm the patch change. Move the cursor to the OK button of the dialog box and press the [ENTER] key. NOTE • You cannot assign multiple channels to a single input. 4 When you've finished making the assignment, move the cursor to the CLOSE button and press the [ENTER] key. You will return to the RECORDER screen. 5 Assign a channel to the other input in the same way. HINT • The USB memory recorder always records and plays back in stereo. If you want to record in monaural, with the same signal for left and right, you must assign both of the recorder inputs to the same channel. 6 To assign channels to the recorder outputs, move the cursor to the PLAYBACK OUT popup button L or R, and press the [ENTER] key. The OUTPUT CH SELECT popup window will appear. 1 2 LS9-32 1 Category tabs These tabs select the type of channels shown in the lower part of the window. ● CH 1-32 {1-32/33-64} INPUT channels 1-32 {1-32/33-64} will be shown ● ST IN L/R channels of ST IN channels 1-4 will be shown. B Channel select buttons Select the channels that will be patched to the USB memory recorder's outputs, from the following choices. ● CH 1-32 {1-64} INPUT channels 1-32 {1-64} ● STIN 1L/1R-STIN 4L/4R L/R channels of ST IN channels 1-4 7 Use the category tabs and the channel select buttons to select the channel that you want to patch to the USB memory recorder input. If you select a channel to which another signal is already patched, a dialog box will ask you to confirm the patch change. Move the cursor to the OK button of the dialog box and press the [ENTER] key. HINT • You can patch multiple channels to the recorder output. USB memory recorder 10 8 When you've finished making the assignment, move the cursor to the CLOSE button and press the [ENTER] key. You will return to the RECORDER screen. 9 Assign a channel to the other output in the same way. LS9-16/32 Owner's Manual 107