Yamaha LS9-32 Owner's Manual - Page 199
Using USB memory to save/load data, Saving the LS9’s internal data on USB memory, USB memory
View all Yamaha LS9-32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 199 highlights
Using USB memory to save/load data Using USB memory to save/load data This section explains how you can connect commercially-available USB memory to the USB connector located at the right side of the display, and use it to save or load data such as internal settings for the LS9. NOTE • Operation is guaranteed only with USB flash memory. • The operation of storage media with capacities of up to 16GB has been verified. (However, this does not necessarily guarantee the operation of all USB storage media.) The FAT12, FAT16 and FAT32 formats are supported. On the LS9 V1.10 or higher, storage media with a capacity of 4GB or larger will be formatted in FAT32 and storage media with a capacity of 2GB or smaller will be formatted in FAT16. Long file names are not supported. CAUTION • The ACCESS indicator will appear in the constant display area of the screen while data is being accessed, such as during saving, loading, or deleting. Do not disconnect the USB memory or power-off the LS9 while this indicator is shown. Doing so may damage the data in USB memory. Saving the LS9's internal data on USB memory Here's how all of the LS9's internal data (except for the data included in a user authentication key) can be saved on USB memory as a file. The saved file will have an extension of ".L9A". 1 In the DISPLAY ACCESS section, press the [SETUP] key repeatedly to access the USER SETUP screen. SAVE/LOAD button 3 If you want to move to a different directory, move the cursor to the icon of the column of the desired directory, and press the [ENTER] key. To move to the next higher level, move the cursor to the arrow button in the PATH field and press the [ENTER] key. 4 Move the cursor to the SAVE button and press the [ENTER] key. A keyboard window will appear, allowing you to enter a file name and comment. User settings (Security) 2 Move the cursor to the SAVE/LOAD button and press the [ENTER] key. The SAVE/LOAD popup window will appear. 5 Enter a file name of up to eight characters and a comment of up to 32 characters; then move the cursor to the SAVE button and press the [ENTER] key. When the file has finished being saved, the popup window showing the save progress indication and the type of data will close. 19 SAVE button LS9-16/32 Owner's Manual 199