Yamaha LS9-32 Owner's Manual - Page 97
Selecting the output channel for each, output port, In the OUTPUT PORT SETUP field, move
View all Yamaha LS9-32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
● Selecting the output channel for each output port Here's how to select the output channel that will be the output source for each output port. 1 In the DISPLAY ACCESS section, press the [SETUP] key repeatedly to access the SYSTEM SETUP screen. 2 4 5 6 7 8 9 J Changing the output patching 3 1 LS9-16 LS9-32 In the OUTPUT PORT SETUP field in the center of the screen, you can select the output port assigned to the output channel from the following choices. ● OMNI 1-8 {1-8/9-16} Select the output channels assigned to OMNI OUT jacks 1-8 {1-16}. ● SLOT {1/2} 1-8/9-16 Select the output channels assigned to output channels 1-16 of the slot(s) {1/2}. ● 2TR OUT Select the output channel assigned to the 2TR OUT DIGITAL jack. 2 In the OUTPUT PORT SETUP field, move the cursor to the button for the output ports that you want to set, and press the [ENTER] key. The OUTPUT PORT popup window will appear, allowing you to make output port settings. 1 INITIALIZE button This initializes the settings for the displayed output ports. When you move the cursor to this button and press the [ENTER] key, a dialog box will ask you to confirm the Initialize operation. B I/O card type If the output channel of a slot is selected for opera- tions, this area indicates the type of I/O card installed 9 in that slot. Input/output patching C DELAY SCALE field Use the following buttons to select the units for the delay time displayed below the delay time setting knob (6). ● METER The delay time is displayed as a distance in meters, calculated as the speed of sound at an air temperature of 20°C (68°F) (343.59 m/s) × delay time (seconds). ● FEET The delay time is displayed as a distance in feet, calculated as the speed of sound at an air temperature of 20°C (68°F) (1127.26 feet/s) × delay time (seconds). ● SAMPLE The delay time is displayed in units of samples. If you change the sampling frequency on which the LS9 operates, the number of samples will change accordingly. ● msec The delay time is displayed in units of milliseconds. D Output port This is the type and number of the output port to which the channel is assigned. E Channel select button This button selects the channel assigned to the output port. The number of the currently selected channel is shown. LS9-16/32 Owner's Manual 97