Yamaha LS9-32 Owner's Manual - Page 77
Using a popup window
View all Yamaha LS9-32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Sending signals from MIX channels and STEREO/MONO channels to MATRIX buses 3 To adjust the send level from a MIX channel to the selected MATRIX bus, move the cursor to the corresponding knob of the FROM MIX field, and operate the [SELECTED SEND] encoder. You can obtain the same result by operating the dial or the [DEC]/[INC] keys. If the send-destination MATRIX bus is set to stereo, the send level to the two adjacent odd-numbered/evennumbered MATRIX buses will be linked. 4 To switch the on/off status of a signal sent from a MIX channel to the selected MATRIX bus, move the cursor to the corresponding knob of the FROM MIX field and press the [ENTER] key. If you switch this off, the knob will turn grey. To turn it back on, press the [ENTER] key once again. NOTE • When the SELECTED CH VIEW screen for MATRIX channels is displayed, the keys of the MIX/MATRIX section will operate as keys that select the send-destination MIX bus for the input channels. 5 Use the top panel [SEL] keys to switch the send-destination MATRIX channel and control the send level to a specific MATRIX bus in the same way. 2 Use the LAYER section keys and the channel module section [SEL] keys to select the send-source MIX, STEREO (L/R), or MONO channel. 3 Use the MIX/MATRIX SELECT section keys to select the send-destination MATRIX bus. Only the LED of the corresponding key will blink, indicating that it is selected as the send-destination. 4 Move the cursor to the SEND popup button in the screen, and press the [ENTER] key to access the MATRIX SEND popup window. In the MATRIX SEND popup window you can view 6 eight MIX channels or the STEREO (L/R) and MONO channels at once, and control the send level, on/off status, and send point for the signals sent to the MATRIX bus. The MATRIX SEND popup window shows the parameters for a maximum of eight channels that include the channel you selected in step 3. 1 2 3 4 Output channel operations Using a popup window Here's how you can use the MATRIX SEND popup window to adjust the send levels from up to eight channels to a MATRIX bus. 1 Press the SELECTED CHANNEL section [HOME] key. The SELECTED CH VIEW screen will appear in the display. 1 1 Channel number / Channel name This indicates the number and name of the sendsource channel. B PRE button This switches the position from which the signal is sent from the send-source channel to the currently selected MATRIX bus. If this button is on, the pre-EQ or pre-fader signal will be sent; if this button is off, the signal from immediately after the [ON] key will be sent. C TO MATRIX ON/OFF button This is an on/off switch for the signal that is sent from the send-source channel to the currently selected MATRIX bus. D TO MATRIX LEVEL knob This adjusts the level of the signal that is sent from the send-source channel to the currently selected MATRIX bus. 1 SEND popup button LS9-16/32 Owner's Manual 77