Yamaha LS9-32 Owner's Manual - Page 160

About the virtual rack 5 Switch the tabs as necessary, and select the input source that you want to use. When you select an input source in the OUTPUT CH SELECT popup window, a dialog box will ask you to confirm the change in patching. To confirm the operation, move the cursor to the OK button and press the [ENTER] key. HINT • You have the option of making settings so that the patch change confirmation dialog box does not appear (→ p. 194). • If you selected 31 Band GEQ, you'll be able to select one channel of input; otherwise you'll be able to select two channels of input. 6 Move the cursor to the OUTPUT button for that rack, and press the [ENTER] key. The INPUT CH SELECT popup window will appear, allowing you to select the output destination for the rack. 1 2 3 1 Channel select tabs These tabs switch the type of channels that are shown in the lower part of the window. B Channel select buttons Use these buttons to select the output destination. C CLOSE button Closes the popup window. The following output destinations can be selected in this popup window (multiple selections are allowed). Tab name CH 1-32 (*1) CH33-64 (*1) (LS9-32 only) STIN (*1) CH 1-32 (INSERT OUT) OUT CH (INSERT OUT) Button name CH 1-32 CH 33-64 STIN1L/1R- 4L/4R CH 1-32 MIX 1-16 MTRX 1-8 ST L, ST R, MONO Output destination INPUT channel 1-32 inputs INPUT channel 33-64 inputs ST IN channel 1-4 inputs INPUT channel 1-32 Insert In MIX channel 1-16 Insert In MATRIX channel 1-8 Insert In STEREO (L/R) channel Insert In, MONO (C) channel Insert In *1: This cannot be selected for 31 Band GEQ or Flex15GEQ. HINT • If you selected the Insert In of a certain channel as the output destination for 31 Band GEQ or Flex15GEQ, the Insert Out of the same channel will automatically be selected as the input source of that rack. When you defeat an Insert In, the Insert Out will also be defeated automatically. 7 Switch the tabs as necessary, and select the output destination that you want to use. When you select an output destination in the INPUT CH SELECT popup window, a dialog box will ask you to confirm the patching change. To confirm the operation, move the cursor to the OK button and press the [ENTER] key. HINT • You have the option of making settings so that the patch change confirmation dialog box does not appear (→ p. 194). • You can specify multiple output destinations for a rack. • If you selected 31 Band GEQ, you'll be able to select one channel of output; otherwise you'll be able to select two channels of output. 8 To turn Recall Safe on/off, move the cursor to the SAFE button for that rack and press the [ENTER] key. If Recall Safe is turned on for a rack, the contents and parameters of that rack will not change when a scene is recalled. For more about Recall Safe, refer to "Using the Recall Safe function" (→ p. 140). HINT • The type of GEQ or effect mounted in each rack, its parameter settings, and the input-source/output-destination settings are saved as part of the scene. 160 LS9-16/32 Owner's Manual