Yamaha LS9-32 Owner's Manual - Page 52
make sure that the [ON] key of the, In the channel module or the ST
View all Yamaha LS9-32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Setup required when starting up HINT • If you've turned on POPUP APPEARS WHEN PRESSING KNOBS in the PREFERENCE popup window (→ p. 194), you can also access this popup window by pressing the SELECTED CHANNEL section [PAN] encoder. 4 In the STEREO MASTER section of the top panel, make sure that the STEREO channel [ON] key is on, and raise the STEREO channel fader to 0 dB. 5 Make sure that the ST button for each channel in the window is on (white characters on a pink background). The ST button is an on/off switch for the signal sent from each channel to the STEREO bus. This is the same function as the ST button in the SELECTED CH VIEW screen. 6 To adjust the pan (INPUT channel) or balance (ST IN channel) of the signal sent from the input channel to the STEREO bus, move the cursor to the PAN/BAL knob of the desired channel in the window, and operate the dial or the [DEC]/[INC] keys. 7 In the channel module section or the ST IN section, make sure that the [ON] key of the channel you want to operate is turned on. 8 Raise the fader/encoder of each channel to obtain an appropriate volume. 9 If you want to operate a channel that is not currently shown in the popup window, use the [SEL] key to select that channel, and then make settings for it. For example if INPUT channels 1-8 are shown in the popup window, pressing the INPUT channel 9 [SEL] key will change the popup window to INPUT channels 9-16. If you press a [SEL] key of the ST IN section, the L/R channels of ST IN channels 1-4 will be displayed together. 52 LS9-16/32 Owner's Manual