Yamaha LS9-32 Owner's Manual - Page 103
Directly outputting an INPUT channel, SEL] keys to select the INPUT channel
View all Yamaha LS9-32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Directly outputting an INPUT channel Directly outputting an INPUT channel The signal of an INPUT channel can be output directly from the desired OMNI OUT jack or from the output channel of a desired slot. For example by sending signals to an external digital recorder via a digital I/O card installed in a slot, you can make a live recording without affecting the LS9's internal mixing. 1 Connect your external device to an OMNI OUT jack or to an I/O card installed in a slot {1/2}. DIGITAL OUT Digital I/O card DIGITAL IN Digital recorder 3 Move the cursor to the DIRECT popup button in the screen, and press the [ENTER] key. The DIRECT OUT popup window will appear. In this popup window you can view the name of each channel, switch the direct output point, and adjust the output level, in groups of eight channels. 1 2 3 4 5 6 9 7 LS9 Input/output patching NOTE • If you install a digital I/O card in a slot and digitally connect an external device, you must synchronize the word clock of the LS9 and the external device (→ p. 46). 2 Press the [HOME] key to access the SELECTED CH VIEW screen, and use the [SEL] keys to select the INPUT channel from which you want to take a direct output. 1 1 DIRECT popup button 1 Channel block diagram This shows the direct output point for the selected channel. B Channel number This is the channel number. C Channel name This is the channel name. D Direct out point select box This selects the point from which the signal will be directly output. Move the cursor to this box and use the dial or the [DEC]/[INC] keys to switch between PRE HPF (immediately before the high pass filter), PRE EQ (immediately before the EQ), or PRE FADER (immediately before the fader). E DIRECT ON/OFF button This button turns direct output on/off. To switch this on/off, move the cursor to this button and use the [DEC]/[INC] keys or the [ENTER] key. F Port select popup button This button selects the output port that will be patched to direct output. The currently selected output port is shown. G DIRECT OUT LEVEL knob This knob adjusts the level of the direct output. LS9-16/32 Owner's Manual 103