Yamaha LS9-32 Owner's Manual - Page 22
Data entry USB connector side panel, to the right, of the display, EQ [HIGH] key, HOME] key
View all Yamaha LS9-32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Top panel I EQ [HIGH] key J EQ [HIGH MID] key K EQ [LOW MID] key L EQ [LOW] key These keys select the band controlled by encoders 6-8. By simultaneously pressing the EQ [HIGH] key and EQ [LOW] key, you can reset the gain of all four bands to 0 dB. M [HOME] key This key returns the state of the LS9's panel to home position. When you press this key, the panel will change as follows. • The display will show the SELECTED CH VIEW screen for the currently selected channel. • The channel level function will be assigned to the faders (SENDS ON FADER mode will be defeated). ⁄2 USB connector (side panel, to the right of the display This connector lets you connect USB memory. 1 ⁄1 Data entry section This section lets you edit specific parameters in the screen. 1 1 USB connector USB memory can be connected here, and used to save or load internal data. User authentication key data to define the user level can also be saved on USB memory and used to restrict the functionality that is available to each user. NOTE • Operation is guaranteed only for USB flash memory. 2 3 4 1 [DEC]/[INC] keys These keys increment or decrement the value of the parameter at which the cursor is located in the screen, in steps of -1/+1. B Cursor keys These keys move the cursor up/down/left/right in the screen. C Dial This dial continuously increments or decrements the value of the parameter at which the cursor is located in the screen. D [ENTER] key This key is used to switch a button in the screen on/off, or to confirm a change you make. ■ USB memory format Only USB memory that is 2 GB or less in capacity and is formatted in FAT12, FAT16, or FAT32 is supported. If the USB memory is formatted in any other way, you must reformat it in the USER SETUP screen. ■ Write protection Some USB memory has write protection that prevents data from being erased inadvertently. If your USB memory contains important data, we suggest that you use its write protect feature to prevent accidental erasure. Conversely, you must make sure that your USB memory's write protect feature is disabled before you attempt to save data to it. CAUTION • The ACCESS indicator will appear in the upper part of the screen while data is being accessed, such as during saving, loading, or deleting. During this time, you must not disconnect the USB memory from the USB connector or power-off the LS9. Doing so may damage your USB memory, or damage the data in the LS9 or in the USB memory. 22 LS9-16/32 Owner's Manual