Yamaha LS9-32 Owner's Manual - Page 106
Assigning channels to the input/output of the recorder
View all Yamaha LS9-32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Assigning channels to the input/output of the recorder Assigning channels to the input/output of the recorder Here's how to patch the desired channels to the input and output of the USB memory recorder. You can patch any desired output channel or the direct output of an INPUT channel to the recorder input, and you can patch the recorder output to any desired input channel. 1 In the DISPLAY ACCESS section, press the [RECORDER] key repeatedly to access the RECORDER screen. In this screen you can assign signals to the input and output of the USB memory recorder, and perform recording and playback operations. 2 1 34 8 6 7 F PLAYBACK OUT field Here you can make settings for the recorder outputs. G PLAYBACK OUT popup buttons L/R These buttons access the INPUT CH SELECT popup window, where you can patch channels to the L/R outputs of the recorder. H Output level meter This level meter indicates the level of the signal being output from the recorder. I OUTPUT CUE button This button cue-monitors the signal that is being output from the recorder. Move the cursor to the button and press the [ENTER] key to turn cue on/off. 2 To assign channels to the recorder inputs, move the cursor to the RECORDER INPUT popup button L or R, and press the [ENTER] key. The OUTPUT CH SELECT popup window will appear. 5 9 1 RECORDER INPUT field Here you can make settings for the recorder inputs. B RECORDER INPUT popup buttons L/R These buttons access the OUTPUT CH SELECT popup window, where you can patch channels to the L/ R inputs of the recorder. C ATT (attenuator) knob This knob adjusts the amount of attenuation/boost for the signal that is input to the recorder. You can adjust the value in 0.1 dB steps in a range of -96 to +24 dB. The current value is shown immediately below the knob. D Input level meter This level meter indicates the level of the signal being input to the recorder. E INPUT CUE button This button cue-monitors the signal that is being input to the recorder. Move the cursor to the button and press the [ENTER] key to turn cue on/off. 1 2 LS9-32 1 Category tabs These tabs select the type of channels shown in the lower part of the window. ● OUT CH Output channels will be shown. ● CH 1-32 {1-32/33-64} Direct outputs of INPUT channels 1-32 {1-32/ 33-64} will be shown. 106 LS9-16/32 Owner's Manual