Yamaha LS9-32 Owner's Manual - Page 150
Press the DISPLAY ACCESS MONI, TOR] button to access the MONITOR
View all Yamaha LS9-32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
Using the Cue function 4 Press the [CUE] key of a desired channel to turn it on. The Cue signal of the corresponding channel will be sent to the monitor signal output destination. You can also watch the Cue meter of the meter field to check the output level of the cue signal. The ACTIVE CUE indicator located below the Cue meter indicates the CUE group (INPUT or OUTPUT) that is currently turned on. CUE meter ACTIVE CUE indicator HINT • If you want Cue operations and channel select operations to be linked, open the PREFERENCE popup window of the USER SETUP screen, and turn "[CUE]>[SEL] LINK" on (→ p. 194). 5 Press the DISPLAY ACCESS section [MONITOR] button to access the MONITOR screen, and use the MONITOR LEVEL knob in the screen to adjust the level of the cue signal. If PHONES LEVEL LINK is ON, you can use both the MONITOR LEVEL knob and the front panel PHONES LEVEL control to adjust the monitor level when monitoring through headphones. 6 To defeat Cue, press the [CUE CLEAR] key or the currently-on [CUE] key once again. If you want to clear all Cue selections, move the cursor to the CUE CLEAR button in the CUE screen, and press the [ENTER] key. HINT • All Cue selections will be cleared if you switch between MIX CUE mode and LAST CUE mode in the CUE MODE section. • You can also assign the same function as the CLEAR CUE button to a user-defined key (→ p. 196). 150 LS9-16/32 Owner's Manual