Yamaha LS9-32 Owner's Manual - Page 92
Assigning channels to the custom fader layer
View all Yamaha LS9-32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
About the custom fader layer • Assigning channels to the custom fader layer Of the above fader layers, channels are pre-assigned to fader layer 1-16 {1-32}, fader layer 17-32 {33-64}, and the master fader layer (→ p. 28). However, you are free to assign desired channels to the custom fader layer that is recalled when you press the LAYER [CUSTOM FADER] key. For example, INPUT channels belonging to different fader layers could be assigned to consecutive modules so that they can be operated together. Alternatively, input channels and output channels can both be assigned, so that you could simultaneously operate the send level from an INPUT channel to a specific MIX bus at the same time that you adjust the master level of that MIX bus itself. CH1 CH5 CH10 CH13 CH17 CH19 MIX1 MIX2 Assigning channels to the custom fader layer To assign the desired channels to the custom fader layer, proceed as follows. 1 In the DISPLAY ACCESS section, press the [SETUP] key repeatedly to access the USER SETUP screen. 2 Move the cursor to the CUSTOM FADER LAYER popup button in the screen, and press the [ENTER] key. The CUSTOM FADER LAYER popup window will appear, allowing you to select the channel that will be assigned to each channel module or ST channel. 1 1 2 1 CUSTOM FADER LAYER popup button 92 LS9-16/32 Owner's Manual LS9-32