Yamaha LS9-32 Owner's Manual - Page 148
Using the Cue function, About cue groups
View all Yamaha LS9-32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
Using the Cue function Using the Cue function This section explains how to use the LS9's Cue function. About cue groups The LS9's cue signals can be categorized into the following three groups. 1 INPUT CUE group The cue signals of input channels make up this group. To enable Cue for this group, press to turn on the [CUE] key of a channel module to which an INPUT channel is assigned or the [CUE] key of a ST IN channel. C Other CUE group These are the Cue signals operated using buttons displayed in the screen. This group is enabled if you turn on a CUE button in a RACK screen to which you've assigned an effect, the CUE button of the RECORDER screen, or the KEY IN CUE button of the DYNAMICS 1/2 popup window. This group will automatically be disabled when you exit the corresponding screen. CUE button in the screen [CUE] key of a channel module to which an INPUT channel is assigned [CUE] key of a ST IN channel B OUTPUT CUE group The cue signals of output channels make up this group. To switch to Cue for this group, press to turn on the [CUE] key of the STEREO MASTER section or the [CUE] key of a channel module to which a MIX/MATRIX/MONO channel is assigned. [CUE] key of the STEREO channel It is not possible to simultaneously turn on Cue between different groups. Normally, the group to which the most recently pressed [CUE] key (or a CUE/KEY IN CUE button in the screen) belongs will take priority, and the [CUE] keys of the previously selected group will be defeated. However if you switch the Cue signal group in a specific order, the state of the [CUE] keys of the previouslyselected group will be restored when the current Cue signal is defeated. The following illustration shows the priority order of the [CUE] keys. After you have switched groups from lower to upper levels, if you then defeat Cue for the upper group, the previous [CUE] key status of the group immediately below will be restored. Other CUE group INPUT CUE group OUTPUT CUE group [CUE] key of a channel module to which a MIX/MATRIX/MONO channel is assigned For example if you switch groups in the order of OUTPUT CUE group → INPUT CUE group → Other CUE group, you can then successively defeat the [CUE] keys (CUE/KEY IN CUE buttons) to successively restore the [CUE] key status of the previously selected group. However, if the CUE MODE is LAST CUE, the state of the [CUE] key is not reproduced. 148 LS9-16/32 Owner's Manual