Yamaha LS9-32 Owner's Manual - Page 137
Clearing a scene, select the scene number that you want
View all Yamaha LS9-32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
Editing scene memories 7 To execute the Paste operation, move the cursor to the OK button and press the [ENTER] key. The scene stored in the buffer memory will be pasted to the scene number you selected in step 5. If you decide to cancel the Paste operation, use the CANCEL button instead of the OK button. NOTE • Be aware that when you paste to a scene number in which a scene has already been stored, the existing scene will be overwritten. • Read-only scenes or write-protected scenes cannot be pasted. Clearing a scene Here's how to clear a specified scene. 1 In the DISPLAY ACCESS section, press the [SCENE MEMORY] key to access any one of the SCENE MEMORY screens. 2 Make sure that the cursor is located somewhere other than the constant display area, and use the dial or the [DEC]/[INC] keys to select the scene number that you want to clear. 3 Move the cursor to the CLEAR button and press the [ENTER] key. A dialog box will ask you to confirm the Clear operation. 4 To execute the Clear operation, move the cursor to the OK button and press the [ENTER] key. The scene number you selected in step 2 will be cleared. If you decide to cancel the Clear operation, use the CANCEL button instead of the OK button. NOTE • Read-only scenes or write-protected scenes cannot be cleared. 13 Scene memory LS9-16/32 Owner's Manual 137