Yamaha LS9-32 Owner's Manual - Page 168
Inserting an internal effect into a channel, Move the cursor to the TO MIX SEND LEVEL
View all Yamaha LS9-32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
About the internal effects 5 To change the mix balance of the original sound and effect sound, move the cursor to the MIX BAL. knob and use the dial or the [DEC]/[INC] keys. The MIX BAL. knob adjusts the balance between the original sound and effect sound included in the output signal from the effect. This parameter is provided for all effect types. If you're using the effect via send/return, set this to 100% (effect sound only). HINT • For details on editing the effect parameters, refer to "Editing the internal effect parameters" (→ p. 170). 6 To adjust the effect send level of an input channel, press the [HOME] key to access the SELECTED CH VIEW screen, and access the input channel that you want to control. 1 2 8 To adjust the master level of the effect send, call up the fader layer that includes the MIX channel you specified as the inputsource of the rack in step 2, and adjust the corresponding fader. Set the level as high as possible without allowing the post-effect signal to reach the overload point. 9 To adjust the effect return level, operate the encoder of the ST IN channel you selected as the output-destination of the rack in step 3. Inserting an internal effect into a channel Here we will explain how to insert an effect into a channel by assigning the input/output of the internal effect to the input/output of the desired channel (except for a ST IN channel). 1 As described in "Mounting a GEQ or effect in the virtual rack" (→ p. 158) steps 1-3, mount an effect in a rack. A rack in which an effect is mounted will indicate the effect type used by that effect, and the bypass on/off status. 1 SEND field B TO MIX SEND LEVEL knob 7 Move the cursor to the TO MIX SEND LEVEL knob for the desired MIX bus, and use the dial or the [DEC]/[INC] keys to adjust the send level. With these settings, the signal will be sent from the input channel to the internal effect. Adjust the send level of other input channels in the same way. By moving the cursor to the knob and pressing the [ENTER] key, you can switch the signal sent from each channel to the corresponding bus on/off, and access a popup window where you can choose the send point (PRE/POST) (→ p. 64). NOTE • Make sure that the send level from the ST IN channel you selected in step 3 to the corresponding MIX bus is set to 0. If you raise this send level, the output of the effect will be returned to the input of the same effect, possibly causing oscillation. 2 1 3 1 Racks B INPUT buttons C OUTPUT buttons 2 Use the INPUT L button to open the OUTPUT CH SELECT popup window, and select the insert-out of a channel as the inputsource. Insert-out will be assigned to the L input of the effect. For details on the OUTPUT CH SELECT popup window, refer to step 4 of "Mounting a GEQ or effect in the virtual rack" (→ p. 158). 168 LS9-16/32 Owner's Manual