Yamaha LS9-32 Owner's Manual - Page 208
Switching a digital I/O card’s SRC on/off
View all Yamaha LS9-32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 208 highlights
Switching a digital I/O card's SRC on/off Switching a digital I/O card's SRC on/off If a digital I/O card with SRC (Sampling Rate Converter) functionality (such as the MY8-AE96S) is installed in the slot {slot 1/2}, you can use the SLOT SETUP popup window to turn the card's SRC on/off. In this window you can also check the operating status of the I/O card(s) installed in the slot(s). 1 In the DISPLAY ACCESS section, press the [SETUP] key repeatedly to access the SYSTEM SETUP screen. LS9-32 1 1 SLOT SETUP button 2 Move the cursor to the SLOT SETUP button of the MIXER SETUP field in the lower part of the screen, and press the [ENTER] key. The SLOT SETUP popup window will appear, allowing you to make slot-related settings. This popup window contains the following items. 1 2 3 4 C SRC buttons For digital I/O cards that contain a built-in SRC (Sampling Rate Converter), the SCR can be switched on/off in groups of two channels. D EMPHASIS This area indicates whether emphasis processing is applied to the input signals of a slot in which an AES/ EBU format digital I/O card is installed, in units of two channels. This indication is displayed as follows. Item ---ON OFF Description No signal, or a signal without emphasis is being input A valid digital audio signal is being input, and emphasis is turned On for that signal A valid digital audio signal is being input, and emphasis is turned Off for that signal 3 To turn on the SRC that is built-into the digital I/O card, move the cursor to the corresponding SRC button and press the [ENTER] key. The SRC can be turned on/off in units of two channels. For channels whose SRC is turned on, input/output can occur correctly even if the input signal is not synchronized with the LS9's clock source. 4 To close the WORD CLOCK popup window, move the cursor to the CLOSE button (or the × symbol in the upper right) and press the [ENTER] key. You will return to the SYSTEM SETUP screen. LS9-32 1 Card type {Card type / Slot number} This area shows the type of I/O card installed in the slot. {On the LS9-32, this area shows the slot number and the type of I/O card in each slot.} B FREQ (Frequency) This indicates the sampling frequency of the signal being input to each channel of an MY8-AE96 or MY8-AE96S digital I/O card, in sets of two channels. 208 LS9-16/32 Owner's Manual