Yamaha LS9-32 Owner's Manual - Page 36
ATT/HPF/EQ popup window ], Move the cursor to the LIB button in
View all Yamaha LS9-32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Using the tool buttons In the SELECTED CH VIEW screen, move the cursor to the knob corresponding to EQ or dynamics 1/2, or to a button that has a ▼ symbol, and press the [ENTER] key. HINT • If POPUP APPEARS WHEN PRESSING KNOBS is turned on in the PREFERENCE popup window (→ p. 194), you can access the popup window by pressing the SELECTED CHANNEL section encoder that corresponds to EQ or dynamics 1/2. [ RACK screen ] In the DISPLAY ACCESS section, press the [RACK 1-4] or [RACK 5-8] key. [ RACK screen ] In the DISPLAY ACCESS section, repeatedly press the [RACK 1-4] or [RACK 5-8] key. HINT • If you want to change the assignment (31BandGEQ, Flex15GEQ, or effect) to each rack, simultaneously press the [RACK 1-4] key and [RACK 5-8] to access the VIRTUAL RACK screen (→ p. 158). 3 Move the cursor to the LIB button in the toolbar and press the [ENTER] key to access the popup window of the corresponding library. 1 2 2 Select the channel (EQ/dynamics) or rack (GEQ/effect) whose settings you want to recall. The method of selecting a channel/rack will depend on the type of popup window or screen that is currently displayed. [ ATT/HPF/EQ popup window ] [ DYNAMICS 1/2 popup window ] Press a [SEL] key on the panel, or move the cursor to the selected channel in the constant display area of the screen, and use the dial or the [DEC]/[INC] keys. Selected channel 1 List This shows the settings that are saved in the library. The highlighted line indicates the data that is selected for operations. Read-only data is indicated by an "R" symbol. B RECALL button This button recalls the settings selected in the list into the currently selected channel (EQ/dynamics) or rack (GEQ/effect). HINT • The right side of the list shows information about the corresponding data (the dynamics type or effect type used, etc.). For the dynamics library, a symbol is shown to indicate whether the data can be recalled by dynamics 1 or 2. 4 Move the cursor to the list, and select the recall-source library number by using the dial or the [DEC]/[INC] keys to move the highlighted line in the list. In some cases, the data selected as the recall-source cannot be recalled into the currently selected channel/ rack. Each library has the following limitations. ● Dynamics library The dynamics library holds three types of data; Dynamics 1 and Dynamics 2 for input channels, and Dynamics 1 for output channels. Recall is not possible if you've selected a type that is not supported by the corresponding dynamics processor. 36 LS9-16/32 Owner's Manual