Yamaha LS9-32 Owner's Manual - Page 126
Copying, moving, or initializing a channel, Copying the parameters of a channel
View all Yamaha LS9-32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
Copying, moving, or initializing a channel Copying, moving, or initializing a channel This section explains how you can copy or move mix parameters between channels, or restore the parameters of a specific channel to their default settings. Copying the parameters of a channel You can copy the mix parameter settings of a channel to another channel. When you execute the copy operation, the settings will overwrite the parameters of the copy-destination. You can copy between the following combinations of channels. • Between input channels • Between the STEREO L/R channel and MONO chan- nel • Between MIX channels • Between MATRIX channels 1 In the DISPLAY ACCESS section, press the [CHANNEL JOB] key repeatedly to access the CH COPY screen of the CHANNEL JOB screens. 25 1 E COPY TARGET field If you've selected a MIX channel, MATRIX channel, or STEREO/MONO channel as the copy-source, use the buttons of this field to select the parameters that will be copied. You may turn both buttons on if desired. If both buttons are on, the following parameters will be copied. ● MODULE PARAM button All parameters of the copy-source channel ● WITH MIX SEND/WITH MATRIX SEND button On/off status and send level settings of the send signals sent to the copy-source channel F COPY button Executes the copy. 2 To select the copy-source channel, press the corresponding [SEL] key to make it light. The corresponding channel is highlighted in the SOURCE CH field of the window. When you choose the copy-source channel, the DESTINATION CHs field is automatically emboldened, allowing you to select the copy-destination. If you want to re-select the copy-source channel, move the cursor to the CLEAR SOURCE button and press the [ENTER] key. NOTE • Copy settings can be made only in the order of "copy-source" → "copy-destination." 3 4 6 1 SOURCE CH field Indicates the channel that is selected as the copysource. B CLEAR SOURCE button This button clears the channels shown in the SOURCE CH field and DESTINATION CHs field. C DESTINATION CHs field Indicates the channels selected as the copy-destination. D CLEAR DEST button This button clears the channels shown in the DESTINATION CHs field. 126 LS9-16/32 Owner's Manual 3 To select the copy-destination channel(s), press the corresponding [SEL] key to make it light (multiple selections are allowed). The corresponding channel(s) is/are highlighted in the DESTINATION CHs field of the window. The channels that can be selected as the copy-destination will depend on the channel you selected in step 2. If you want to re-select all of the copy-destination channels, move the cursor to the CLEAR DEST button and press the [ENTER] key. 4 If you selected a MIX/MATRIX/STEREO/ MONO channel as the copy-source, use the buttons of the COPY TARGET field to select the parameters you want to copy. 5 To execute the Copy operation, move the cursor to the COPY button and press the [ENTER] key. The copy will be executed, and the settings will overwrite the parameters of the copy-destination channel(s). After the copy has been executed, the SOURCE CH field and DESTINATION CHs field will return to an unset state.