Yamaha LS9-32 Owner's Manual - Page 86
Changing the output patching Output, channels only, Setting the pan/balance, PATCH popup button
View all Yamaha LS9-32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Operations in the SELECTED CHANNEL section ● Changing the output patching (Output channels only) To change the output patching of an output channel in the SELECTED CH VIEW screen, use the PATCH popup button. 12 1 PATCH popup button This button displays the HA/PATCH popup window where you can make output port settings for eight channels at a time (→ p. 95). B Output port select popup button This accesses the PATCH/NAME popup window, where you can select the output port and specify the channel name and icon. The output port assigned to that channel is shown inside the button. For channels to which two or more output ports are patched, only one will be shown as a representative. To select the output port and specify the channel name or icon, move the cursor to the output port select popup button and press the [ENTER] key to access the PATCH/ NAME popup window (→ p. 69). HINT • If you want to make output port settings for eight channels at a time, use the PATCH popup button in the screen to access the HA/ PATCH popup window (→ p. 95). • If you've turned on POPUP APPEARS WHEN PRESSING KNOBS in the PREFERENCE popup window (→ p. 194), you can also access the above popup window by pressing the SELECTED CHANNEL section [HA GAIN] encoder. ● Setting the pan/balance To adjust the pan/balance of the signal sent from that channel to the STEREO bus, use the [PAN] encoder of the SELECTED CHANNEL section and the PAN field of the SELECTED CH VIEW screen. The PAN field includes the following items. 1 3 2 B PAN/BAL knob The following parameter will change, according to the channel that is selected. INPUT channel ST IN channel MIX (MONO x 2) channel MIX (STEREO) channel MATRIX (MONO x 2) channel MATRIX (STEREO) channel STEREO channel MONO channel TO STEREO PAN TO STEREO BALANCE TO STEREO PAN MIX BALANCE Not displayed MATRIX BALANCE STEREO BALANCE Not displayed HINT • You can also access the TO STEREO/MONO popup window by moving the cursor to the PAN/BAL knob and pressing the [ENTER] key. C ST/MONO button (INPUT, ST IN, MIX channels only) This switches the on/off status of the signal sent from that channel to the STEREO (L/R) bus and MONO (C) bus. 4 D LCR button If an INPUT, ST IN, or MIX channel is set to LCR mode, the LCR button is displayed in location 3. The LCR button is an overall on/off switch for the signals sent from the channel to the STEREO bus and MONO bus. To adjust the pan/balance of each channel, use the ST/ MONO button or the LCR button to select the send-destination bus, and operate the SELECTED CHANNEL section [PAN] encoder. (Alternatively, move the cursor to the PAN/BAL knob in the screen, and operate the dial or the [DEC]/[INC] keys.) HINT • If you want to make pan/balance settings for eight channels at a time, use the PAN popup button in the screen to access the TO STEREO/MONO popup window (→ p. 72). Alternatively, you can move the cursor to the PAN/BAL knob and press the [ENTER] key to access it. • If you've turned on POPUP APPEARS WHEN PRESSING KNOBS in the PREFERENCE popup window (→ p. 194), you can also access the above popup window by pressing the SELECTED CHANNEL section [PAN] encoder. 1 PAN popup button This button displays the TO STEREO/MONO popup window where you can make pan/balance settings for eight channels at a time. 86 LS9-16/32 Owner's Manual