Yamaha LS9-32 Owner's Manual - Page 164

Graphic EQ operations ● For the LS9-16 On the LS9-16, the bands that can be controlled will depend on the button you selected. In order to adjust all of the bands, you'll need to switch these buttons as you work. Button name [20-630] button [125-4k] button [630-20k] button Bands 16 bands from 20 Hz-630 Hz 16 bands from 125 Hz-4 KHz 16 bands from 630 Hz-20 KHz 6 If you want to copy the currently-displayed 31 Band GEQ settings to the GEQ of another rack, or to initialize the settings, you can do so using the tool buttons at the top of the screen. For details on how to use these buttons, refer to "Using the tool buttons" (→ p. 35). NOTE • If a 31 Band GEQ is using 15 or fewer bands, its settings can also be copied to a Flex15GEQ. HINT • GEQ settings can be saved/loaded at any time using the dedicated library (→ p. 174). ● For the LS9-32 Only the [20-20k] button can be selected. When this button is on, you can use the top panel faders 1-31 to operate all 31 bands. B Operate the faders. The corresponding frequency region will be boosted or cut. HINT • When a top panel fader is in the center (flat) position, the corresponding [ON] key will go dark. This indicates that the corresponding band is not being modified. If you raise or lower the fader even lightly, the [ON] key will light, indicating that this band is being modified. If you press a lit [ON] key to make it go dark, the corresponding band will immediately return to the flat state. C When you've finished making settings, turn off the button(s) of the FADER ASSIGN field. The top panel faders and [ON] keys will return to their previous function. HINT • If a button in the FADER ASSIGN field is on, switching the display to another screen or rack will forcibly defeat the top panel fader assignments. • However if you once again display the same rack, the group of bands you had previously been controlling will automatically be assigned to the faders. • FADER ASSIGN on/off settings apply to all GEQ units together. Using the Flex15GEQ Here we will explain how to use the Flex15GEQ. 1 As described in "Mounting a GEQ or effect in the virtual rack" (→ p. 158) steps 1-3, mount a GEQ in a rack. A rack in which a Flex15GEQ is mounted will show information for two GEQ units (A and B). 1 2 3 1 GEQ (A) B GEQ (B) C Rack graphic display area HINT • When you mount a Flex15GEQ, two monaural 31 Band GEQ units (A and B) are placed in a single rack. However, only up to fifteen bands can be adjusted for each unit. 2 Move the cursor to a rack in which a Flex15GEQ is mounted, and press the [ENTER] key. The RACK screen will appear, allowing you to edit the parameters of GEQ (A) or GEQ (B). To switch the RACK screen, repeatedly press the [RACK 1-4] keys (RACK 1-4 screens) or [RACK 5-8] key (RACK 5-8 screens / EXTERNAL HA screens). For a rack in which a Flex15GEQ is mounted, the RACK screen is shown separately as xA and xB (x is the rack number). 164 LS9-16/32 Owner's Manual