Kyocera KM-2030 Fax System (B) Instruction Handbook - Page 10

1-2

Section 1

Basic Use of this Fax

1

RADF (Reversing Automatic Document Feeder)

[option]

…Documents will be automatically fed one by one onto

the platen for scanning. Duplex (2-sided) documents will be

flipped over automatically for scanning the back side as well.

2

Original table

…Set the documents you want to transmit on this

table. Up to 70 sheets of up to 8

1/2

" x 11" [A4] size plain paper

(8

1/2

" x 14" [B4] or 11" x 17" [A3] : up to 50 sheets) can be set at

one time.

3

Original insert guides

…Adjust these guides to match the width

of the documents.

4

Left cover

…Open this cover when a document jams.

5

Top cover

…Documents are ejected onto this cover after being

scanned.

6

Eject guide

…Open this guide when transmitting documents of a

large size such as 8

1/2

" x 14" [B4] or 11" x 17" [A3].

7

DF open/close lever

…Operate this lever when opening and

closing the DF.

8

Original set indicator

…This indicator indicates the status of the

documents set in the DF. Documents are set properly when the

indicator is lit green.

9

Operation panel

…Use the operation panel to perform the

procedures required for fax communication.

0

Cover plate

…This plate can be raised or lowered by grasping the

tab in order to access the desired one-touch key number. Raise

this plate as well in order to use the various “function” keys

(Broadcast [BROADCAST] key, etc.).

!

Copy store section

…Received documents are ejected and

stored face-down in the copy store section. Up to 250 sheets of

plain paper (75 g/m

2

- 80 g/m

2

) can be stored in this section.

@

Drawers

…This fax machine comes standard with two drawers

installed. Each drawer can hold up to 250 sheets of plain paper

(75 g/m

2

- 80 g/m

2

). The Multi-Bypass can be used as well to feed

paper. Refer to the Instruction Handbook for your copier for more

detailed information regarding the use of tqhe drawers and the

Multi-Bypass.

#

Telephone jacks (T)

…Use these jacks when connecting a

separately purchased telephone to the fax.

[NOTE] This jack is not available in the Netherlands or in lreland.

$

Line jack (L)

…Use those jacks to connect the fax to a telephone

line using the modular cord.

%

ADF (Automatic Document Feeder) [option]

…Documents will

be automatically fed one by one onto the platen for scanning.

^

Main switch

…Turn this switch ON ( | ) in order to perform fax

and copy operations. The message display will light and

operation will be possible.

Names of Parts

(1) Main Body Parts and their Functions

The following contains information on the names and functions of the

parts that are required when this machine is used as a facsimile. Refer to

the Instruction Handbook for your copier for information on other parts of

this machine.

Kyocera KM-2030 Fax System (B) Instruction Handbook - Page 10

Names of Parts

Page 10 highlights