Kyocera KM-2030 Fax System (B) Instruction Handbook - Page 19

Entering your fax number 6 Use the keypad to enter your fax number. * The fax number can be up to 20 digits in length. * If you want to clear the currently displayed number from the message display, simply press the Stop/Clear key. (Inch) (Metric) Section 1 Basic Use of this Fax 2 Registering your station name If you register your name here, it will be shown in the message display of the other party's fax, as well as on the Reception Report that they print out. (This function is only guaranteed to work when the other party's fax is one of our models.) * Use the following procedure as well when you want to change information that is already registered. * If you want to cancel the procedure part way through, press the Reset key. The operation panel will return to the initial mode settings. v :684256_ Enter Fax No. v :684256_ 20 Digits 20 digits Enter fax number (Inch) (Metric) Press the Enter key. 7 Registration of your fax number is complete. * To return to the initial mode settings, press the Reset key. Program Fax Parameter: End Á v :684256 Own Name : Perform steps 1 - 4 of "1 Registering your fax number", 1 page 1-9. Program Fax Parameter: End Á v: Own Name : Use the cursor up or the cursor down key to select "Own Name". 2 (Inch) (Metric) Program Fax Parameter: End v: Á Own Name : Press the Enter key. 3 (Inch) (Metric) Enter Own Name 1-11