Kyocera KM-2030 Fax System (B) Instruction Handbook - Page 73

Manual Fax Transmission Once you are connected with the destination party, transmission can be initiated manually by pressing the Start key. Use this mode when you want to talk to the other party prior to actual transmission of the documents, or when the other party must manually switch to fax reception. Section 2 Various Functions of this Fax * Manual Fax Transmission is only possible if a separately purchased telephone is connected to this fax machine. * If you want to cancel the procedure part way through, press the Reset key. The operation panel will return to the initial mode settings. JUL-08-2001 12:00 Set Document 08-JUL-2001 12:00 Set original (Inch) (Metric) 1. Set the documents you want to transmit. 3. Dial the destination fax number. v :36852 Document:81/2x11 Enter Destination v :36852 Document :A4 Enter destination (Inch) (Metric) 4. Check whether or not you are connected to a fax machine. > If you hear a fax tone... You are connected to a fax machine. Press the Start key. Fax transmission will begin. (Inch) (Metric) JUL-08-2001 12:00 Document:81/2x11 Enter Destination 08-JUL-2001 12:00 Document :A4 Enter destination (Inch) (Metric) 2. Pick up the telephone receiver or press the On-Hook key. > If the other party answers... You are connected to a telephone. Press the Start key at the end of the conversation to initiate transmission. Fax transmission will begin. 5. Hang up the receiver when "Communicating" appears in the message display. * If you press the On-Hook key, the On-Hook indicator will light. (Inch) (Metric) 2-19