Kyocera KM-2030 Fax System (B) Instruction Handbook - Page 42
Enter Destination Name, Enter 2-Digit Key ID, Enter 2-digit ID-code, Enter Box No., Enter box nr
View all Kyocera KM-2030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Section 1 Basic Use of this Fax Entering an F-Code password 10 An F-Code password is used during F-Code Based Communication. However, you do not have to enter an F-Code password here if you have determined in advance with the other party not to use one. > If you want to register an F-Code password, it can be up to 20 digits in length and include any combination of the numerals 0 - 9 and the symbols " " and "#". > If you DO NOT need to register an F-Code password, proceed to step 11. Press the Enter key. 11 Enter Destination Name Entering the other party's name 12 Enter the name of the other party. * The name of the other party can be up to 20 characters in length. (Refer to "Entering Characters", page 1-30.) M.K.W Enter Destination Name Press the Enter key. 13 TX Start Speed: Á 33600bps 14400bps 9600bps Selecting the transmission speed 14 Use the cursor up or the cursor down key to select the desired transmission speed. * If communication errors occur frequently at "33600bps", change the setting to "14400bps" or "9600bps". However, in this case, transmission time will be increased. TX Start Speed: 33600bps Á 14400bps 9600bps > If you pressed the F-Code [SUBADDRESS] key in step 7, 15 proceed to step 21 on page 1-35. > If you DID NOT press the F-Code [SUBADDRESS] key in step 7, press the Enter key and proceed to step 16. Designating the one-touch key for Encrypted 16 Transmission Use the cursor up or the cursor down key to select whether or not you want to designate this key for Encrypted Transmission. Encryption: Á On Off > If you want to designate this key for Encrypted Transmission, select "On" and proceed to step 17. > If you DO NOT want to designate this key for Encrypted Transmission, select "Off" and proceed to step 21. Press the Enter key. 17 Encryption Key ID:00 Enter 2-Digit Key ID Encryption code:00 Enter 2-digit ID-code (Inch) (Metric) Use the keypad to enter the 2-digit key ID-code (01 - 20) that 18 corresponds to the Encryption Key you want to use for this one-touch key. Encryption Key ID:15 Enter 2-Digit Key ID Encryption code:15 Enter 2-digit ID-code (Inch) (Metric) Press the Enter key. 19 Box. No.:0000 Enter Box No. Box nr:0000 Enter box nr (Inch) (Metric) 1-34